Mineral polymer water blocking materials and reinforcement materials

Product Introduction: Independently developed and produced, with many years of production experience, it is a long-term and stable supplier to many mines, and has received good feedback from customers after use.
This water-blocking product is a two-component polymer grouting resin, mainly used for waterproofing and water-blocking projects in tunnels and coal pillars. This product uses special mixing and grouting equipment to inject the / two-component into the permeable formation according to the volume ratio. The material expands and solidifies when exposed to water, forming a high-strength and high-toughness foam. Its low viscosity allows it to penetrate into small gaps. Achieve good water blocking and reinforcement effect.
Scope of use
●Coal pillar and coal wall water blocking and reinforcement
●Mine tunnel plugging project
●Dam body leakage water reinforcement and control
●Tunnel, Water blocking and waterproofing in areas such as mines and subways
Main features
●Can form good bonding with wet surfaces
●Low viscosity, can penetrate into gaps
●High reactivity, Swells when exposed to water
●Low shrinkage compared to traditional grouting sealing materials
Instructions for use and precautions
●In view of the fact that this product is water-absorbent, unused products must be stored in an airtight container container for next use.
●To avoid prolonged contact with eyes and skin, personal protective equipment such as goggles, gloves and work clothes should be worn during operation. If the product comes into contact with skin, wash with soap and water. If the product comes into contact with eyes, rinse immediately with plenty of water in an eyewash cup and seek medical advice. The cured product is harmless.
Packaging and Storage
●This water blocking material is a two-component product, including resin/barrel and curing agent/barrel.
●The product should be stored sealed in a ventilated and dry place, away from direct sunlight, heat sources and rain. The storage period is six months within the temperature range of ℃.