Mine reinforcement polymer materials Coal mine reinforcement polymer materials manufacturers specialize in production

This product is a liquid modified organic polymer resin material. It is a composite product composed of two groups of organic materials. It is mainly used for the reinforcement of coal and rock masses and the sealing of cracks. The two-component materials can react quickly after being mixed to form a high-strength, high-toughness polymer, cementing the original loose and discontinuous coal and rock mass into a continuous and complete stress-bearing body, with excellent bonding properties with the coal and rock formations. Good, after bonding, it has high compressive and shear strength, impact resistance, fatigue resistance, acid and alkali resistance. The material has low viscosity before reaction, good penetration and fluidity, and can penetrate well into the fine cracks of coal seams or rock formations. After reaction and solidification, it has good flexibility and can withstand the deformation of coal and rock formations. The product does not contain volatile solvents and does not produce toxic or harmful gases. When used, a pneumatic pump is used with a mixing gun to inject the two component materials into the coal and rock mass through drilling holes according to the weight ratio.
Product Features
High compressive strength, adjustable reaction time
High flash point, flame retardant, antistatic
The polymer has good toughness, is not brittle under compression, and can withstand coal and rock formations of deformation.
It is safe and reliable after injection into coal and rock mass.
Scope of application
Tunnel surrounding rock reinforcement
Excavation working face roof, coal mining face roof, coal wall, advance support section reinforcement
Fault zone, collapse pillar, coal rock layer Advanced reinforcement of broken zones
Reinforcement and reinforcement of soil layers or soft rock masses in dams, tunnels, subways, culverts and other projects
Blocking of geological boreholes and gas drainage holes.
Packaging and Storage
The two component materials must be stored in plastic or fiberglass containers respectively.
This product must not be mixed with other chemicals during transportation, storage, and use. Before construction, the product should be placed at the ambient temperature of use. The above storage should be placed in a cool, dry warehouse, protected from sun and moisture, and the storage ambient temperature is ~ ℃ When stored in a sealed state, the shelf life is ~ months.