Zhejiang Hangzhou embossed floor manufacturer supply/art floor mold sales

抗折强度：

≥11.5MPa

表面强度(压痕直径）：

≤3.30mm

耐磨度比：

≥300%

The imprinted concrete art floor technology system has developed rapidly in China due to its strong artistry, wide range of colors and styles, low cost and green environmental protection. In Shanghai's urban green space development project, which has been fully recognized by national leaders, color-imprinted concrete art flooring has been widely promoted and adopted, achieving good social benefits and market recognition. (Consult the manager for details)
//
Imprinted concrete is placed on the surface of the paved concrete. After the water on the surface of the concrete disappears, the surface of the concrete is colored and colored by dry sprinkling of colored reinforcing materials. Strengthen, and use special tools to apply the color strengthening agent into the concrete surface to integrate it. When the surface moisture and luster disappears, evenly spread the colored release powder, and immediately use the pre-selected mold to imprint on the concrete surface. Achieve a variety of design styles, textures and colors. After the concrete has been properly cleaned and cured, a sealing protective agent is applied to the surface to make the surface of the art floor anti-pollution, non-slip and strengthened again. In addition to being very decorative, the finished stamped concrete floor has very stable physical properties. (Consult the manager for details)
//
Qinlu Colorful Art Floor Material Construction Technology (Consult the manager for details)
. Where water begins to appear after the concrete is leveled and initially set, the accumulated water should be removed. (About an hour under normal temperature conditions) Spread the colored reinforcement for the first time. Then wipe the board with your hands to finish and smooth it.
For the second spreading operation, according to the temperature difference, choose to spread the colored reinforcement material for the second time, and then perform the second light collection.
. Spread release powder. When the hardened material is initially set at a certain stage and the surface is dry and has no obvious moisture, evenly sprinkle a layer of release powder that matches the hardened material.
Use a mold to press the pattern. Use a mold with pre-selected specifications to press the floral pattern. When pressing, the force should be uniform and consistent, and the mold should be kept fixed and flat. The pressed pattern should be formed at one time and cannot be pressed repeatedly.
The demoulding and demoulding operation should be carried out after the embossed floor material is embossed and formed. Pay attention to the demoulding operation and order, avoid damaging the floor surface, and properly repair the edges after demoulding.
Zhou Qinlu Decoration Materials Co., Ltd. is the flooring expert around you!
Detailed consultation (Manager Zou)