Year1
- 型号：
- DK8-10
- 适用皮带厚度：
- 7.5-16
- 包装：
- 木箱
Strong belt buckle
The belt buckle is made of high-quality carbon steel and has been refined through special technology. The internal structure of the material and surface hardening have the advantages of tensile and shear strength, long life, wear resistance, easy to use, strong connection, etc. It is widely used in The connection of conveyor belts in mines, ports and terminals. Belt buckles are mainly used for the connection of high-strength conveyor belts. They are manufactured using special processes and one-piece structure design, making installation faster, more labor-saving and improving work efficiency. Double rows of long-span steel nails, larger nail width, large bite area, uniform force, and enhanced tensile strength, which increases the tension of the conveyor belt and avoids damage to the groove design on the back of the conveyor belt frame. The steel nails can be buckled in reverse In the conveyor belt, it avoids nail detachment and ensures the integrity of the conveyor belt skeleton. The lower section and the bevel design of the front end of the buckle body reduce the contact between the conveyor belt buckle and the covering layer, the rotating pair of wheels, the cleaner knife edge and the roller. , thereby reducing wear and extending life.
Belt buckles, conveyor belt buckles, tape buckles, strong belt buckles
High-strength belt buckles, easy to bind, no nails missing. The belt buckle has good toughness, wear resistance and durability. The double-breasted buckle has strong applicability to the width of the conveyor belt, making it easier for customers to manage and use. It is suitable for the connection of deep groove conveyor belts that are larger than the groove angle.
To ensure the connection strength, a staggered fastening arrangement is adopted to reduce the relative density of fastening at the threading part. After fastening the buckle, the fastening is embedded in the buckle body to improve the wear resistance of the buckle body and extend the service life of the joint.
The buttons are light and fastened using a pull-rod button binding machine. The labor intensity of button setting is low and the work efficiency is high. It is suitable for use on belt conveyors with an inclination.
The conveyor belt's self-positioning buckle is equipped with a conveyor belt installation limit strip on the inside to make the distance between the conveyor belt and the buckle even.
Belt buckle models,,,,,belt buckles,,,,strong belt buckles,,high strength belt buckles,,,,conveyor belt buckles.
Mechanical connections can be divided into two major categories of buckles
Clamp-type buckles. It consists of three parts: buckle-shaped nails and penetration pins. The buckle body is made of high-strength galvanized carbon steel or stainless steel, the shaped nails are also made of high-strength galvanized steel, and the penetration pin is made of high-strength manganese steel, but it is flexible.
Plywood buckle. The structure is similar to the clip-type conveyor belt scale, but the difference is that the buckle body is wide and flat, with two rows of nail holes on each buckle body, and the Hebei conveyor belt is symmetrically tilted several degrees from left to right. Plywood buckles are suitable for manual installation only. There are two types of plywood buckles: type and type.
Complete specifications of conveyor belts with belt thickness ranging from millimeters to belt buckles of corresponding specifications are available.
Double-row belt buckles are divided into four specifications
Belt buckles are suitable for belt thickness. Belt buckles are suitable for belt thickness
Belt buckles are suitable for belt thickness. Belt buckles are suitable for belt thickness
Conveyor belt compression resistance The strength is not greater than / the minimum diameter of the drum
This belt buckle is suitable for belt buckle fasteners, strong buckle fasteners, and tie rod fasteners
Used for the connection of high-strength conveyor belts of ∕ and below, manufactured using special processes , each unit buckle body is inlaid with three sets of buckle nails, and the staggered buckle nail arrangement has little damage to the fibers of the conveyor belt. The belt buckle body is not easy to warp or fall off when the belt is working. Each set of belt buckles is composed of multiple units and has the advantages of high tensile strength, wear resistance, and long service life. It is suitable for connecting transportation belts.
The belt buckle plays a huge role in the conveyor belt. In order for the conveyor belt to better promote the development of the coal industry, it is necessary to detail the work steps. As an important connection hub for the conveyor belt, in addition to the belt buckle In addition to its own quality issues, its linking method is also crucial. Next, we will introduce in detail the two connection methods of the belt buckle.
The belt buckle plays a huge role in the conveyor belt. In order to better serve the conveyor belt and promote the development of the coal industry, enterprises must ensure its quality level during the production process. Improving the quality of belt buckles not only enables better application of conveyor belts, but also improves the efficiency of coal mining. Currently, there are two popular connection methods for belt buckles in the market. One is a detachable joint connection, and the other is a seamless joint connection. Each connection method has its own characteristics and advantages. The belt buckle connects the two ends of the conveyor belt together. This method is not only simple but also very strong. But it also has shortcomings. The biggest disadvantage is that it is greatly affected by the environment. It is not easy to operate in a relatively harsh environment, and is often affected by factors such as humidity, temperature, friction, etc.
The two connection methods of belt buckles each have their own advantages and need to be selected according to different needs.
If we divide belt buckles according to material, we can divide them into plastic belt buckles, alloy belt buckles, iron belt buckles and copper belt buckles. If we divide belt buckles according to shape, then the types of belt buckles can be It is divided into Japanese buckle, mesh buckle, single needle buckle, double needle buckle and other types. If we divide according to the shape, then we can divide the belt buckle into single mouth and breasted buckle, etc. The so-called breasted buckle is the most commonly used one. A kind of belt buckle, when we choose, we should choose according to our own needs.
The factory mainly produces conveyor belt buckles, strong belt buckles, mining belt buckles, industrial belt buckles, machine belt buckles, one-piece belt buckles, high-strength belt buckles, hand-pull buckle setting machines, and hammer setting machines. Button machines and powerful button fastening machines. Our factory produces nearly 10,000 boxes of belt buckles and more than 1,000 buckle ordering machines. Our products are widely used in mines, ports, docks, coking plants, cement plants and other units. For the connection of conveyor belts, its products have stable quality and novel design, which are worthy of users' trust.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation
WhatsApp
