Jiuzhong empty section polyurethane cleaner has excellent quality

型号：

P H N I O

工作温度：

-40 C～90 C

包装：

木箱

Empty Section Polyurethane Cleaner
Empty Section Cleaner Empty Section Polyurethane Cleaner Type Cleaner Type Empty Section Cleaner Empty Section Cleaner Drawing Alloy Cleaner Empty Section Alloy Rubber Cleaner Belt Empty Section Cleaner Triangle Empty Section Cleaner Polyurethane Empty Section Cleaner Plow Type Empty Section Cleaner
Installation and Adjustment of Type Polyurethane Cleaner When installing the main machine, first determine the installation position, weld the front boom to the cleaner triangle plate, and then The crossbeam is welded on the frame, the front boom adjustment screw is pressed against the crossbeam, and the distance between the scraper and the tape is adjusted. The rear lifting ring angle iron is welded under the groove of the frame, and the tail of the cleaner is hung to automatically adjust and clean.
The empty section cleaner is a cleaner at the tail of the belt conveyor. It cleans the non-working surface of the conveyor belt, scrapes off the accumulation of material and debris on the back of the belt, and prevents it from being brought into the tail drum.
The empty section cleaner is suitable for cleaning non-working surface conveyor belts. The scraper blade is made of polyurethane plate, which has low friction coefficient and anti-corrosion. It will not damage the belt if it breaks. It has high safety, simple structure and easy maintenance. There are several types of empty section polyurethane cleaners: type, type, type, inclined type, etc. Bandwidth
Model belt width


br/>
br/> br/> br/> br/>
The importance of empty section cleaner
During the transportation of elastic materials on the working surface of the conveyor belt, it is inevitable that the material will be deflected and scattered. When it falls on the non-working surface of the return section, it will be involved in the tail roller or the redirection roller, and it will stick. On the surface of the roller, uneven tension of the conveyor belt is caused, which damages the conveyor belt. Larger materials or debris colliding with the tail roller will directly damage the equipment and even cause casualties. Therefore, a cleaner must be installed at the entrance of the reversing roller and the tail roller in the return section. That is, the empty section cleaner.
Empty section cleaner in English
The empty section cleaner uses two scrapers to clean, one is a high wear-resistant special carbide, and the other is a wear-resistant rubber scraper, which has a buffering effect Automatically adjusts the contact pressure between the cleaning scraper and the tape, cleaning the material cleanly without damaging the belt. It is easy to install, adjust and replace, which can eliminate environmental pollution, reduce the amount of maintenance required by workers, and extend the service life of the tape.
The empty section alloy cleaner is suitable for cleaning non-working surface conveyor belts. The scraper blade is made of carbide, with high wear resistance, anti-corrosion, high safety, simple structure and easy maintenance. Performance characteristics: This product cleans the scraper It is a highly wear-resistant special carbide that can be cleaned cleanly and is easy to install, adjust and replace. It can eliminate environmental pollution, reduce the amount of maintenance required by workers, and extend the service life of the tape.
The alloy rubber cleaner consists of an alloy scraper, a knife holder, a rubber body, a mounting support, and a frame
The type (empty section) is installed at the non-working surfaces of the head and tail, and is used to clean the head , tail to remove adherent materials on non-working surfaces. The
type cleaner is installed on the stable working surface of the reversible conveyor and can be used to clean any part of the conveyor belt.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation