Year1
- 型号：
- P H N I O
- 工作温度：
- -40 C～90 C
- 包装：
- 木箱
Type polyurethane cleaner
Product description of empty section cleaner
The materials transported by the conveyor belt often contain sticky substances, such as coal dust, mud, and powdery materials, part of which will stick to the conveyor belt On the working surface, it cannot be completely removed when unloading. As the belt runs, it will stick to the roller, which will cause the following consequences for a long time
. The material enters the shell of the roller, thereby increasing the wear of the bearing and the roller. Material stuck to the roller shell will damage and roughen the surface rubber of the conveyor belt, accelerating the damage of the conveyor belt.
. If the adhesive material enters the tail wheel and the reversing roller, the material will stick to the surface of the roller, and the more it sticks, the more it will stick, causing the conveyor belt to deviate, increase the wear of the conveyor belt, and cause adverse consequences.
. The material sticks to the driving roller and increases the friction on the roller, which may cause damage to the conveyor belt surface rubber and the roller coating.
. If the materials are not removed in time, a blanking area will be formed in the entire working channel, causing environmental pollution, increasing the amount of cleaning labor, affecting the physical and mental health of employees, and increasing corporate costs.
Therefore, in order to ensure the normal operation of the belt conveyor, the attachments on the conveyor belt must be cleaned. If the cleaning device is good, the life of the rollers, conveyor belts, etc. can be extended.
It can be seen that the empty section cleaner plays an important role in the belt conveyor that cannot be ignored.
Installation and debugging of polyurethane cleaner
When installing the machine, first determine the installation position, weld the front boom to the cleaner triangle plate, and then weld the horizontal beam to the frame. Adjustment
Put the screws on the crossbeam, adjust the distance between the scraper and the tape, weld the rear lifting ring angle iron under the frame groove, hang the tail of the cleaner, and automatically adjust the cleaning head to work The first cleaning type
The head works the second cleaning type
The type is installed on the stable working surface of the reversible running conveyor and is used for reversible cleaning of the conveyor belt
The type is installed at the head and tail of the non-standard At the working surface, it is used for non-working surface cleaning
The type is installed on the reversibly running non-working surface and is used for reversible cleaning on the non-working surface
The empty section cleaner is used for cleaning the tail of the belt conveyor Clean the non-working surface of the conveyor belt, scrape off the accumulation of material and debris on the back of the belt, and prevent it from being brought into the tail drum.
The polyurethane spring cleaner can effectively clean the adhesion on the surface of the roller and the bottom of the conveyor belt. It can prevent the conveyor belt from deflecting, extend the service life of the conveyor belt and accessories
and prevent accidents. Polyurethane cleaners are the main accessories of belt conveyors that are widely used in steel, mining, docks, power plants and other industries. Polyurethane cleaners play an important role on conveyors that cannot be ignored.
This product has the following characteristics
) It adopts a high wear-resistant special carbide scraper, and its good comprehensive mechanical properties extend the service life of the product
) It has a compact design structure and is formulated with Reasonable, the product is light, beautiful and easy to operate
The importance of empty section cleaner
During the process of transporting materials on the working surface of the conveyor belt, it is inevitable that the material will wander and scatter. When it falls on the return journey Sections of the non-working surface will be rolled
into the tail roller or the reversing roller, and adhere to the surface of the roller, causing uneven tension on the conveyor belt, damaging the conveyor belt, and causing larger materials or debris to collide with the tail
The roller will directly damage the equipment and even cause casualties.
Therefore, a cleaner, that is, an empty section cleaner, must be installed at the entrance of the reversing drum and the tail drum of the return section.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation
WhatsApp
