Year1
- 型号：
- P H N I O
- 工作温度：
- -40 C～90 C
- 包装：
- 木箱
Type alloy rubber cleaner
Characteristics of alloy rubber cleaner
The alloy rubber cleaner utilizes the elastic properties of the rubber body itself to automatically adjust the contact pressure between the cleaner scraper and the conveyor belt. , the buffering effect of the rubber body ensures that the stress on the scraper and the running tape is within a certain appropriate range, so that the cleaning material is clean without damaging the tape. Since this product uses a highly wear-resistant special carbide scraper , coupled with better comprehensive structural performance, extends the service life of the product. The compact design structure and reasonable preparation make the product lightweight, beautiful, and easy to operate. The interchangeability and adjustability of spare parts of each product make it easier to install, debug, replace, and repair. .
Specifications of alloy rubber cleaners
Alloy rubber cleaners include type alloy rubber cleaners, type alloy rubber cleaners, type alloy rubber cleaners, type alloy rubber cleaners, and type alloy rubber cleaners.
The alloy rubber cleaner is installed at the head discharge roller to remove adherent materials on the conveyor belt and complete one cleaning.
The alloy rubber cleaner is installed on the stable working surface near the head roller and can be matched with the model for secondary cleaning.
The alloy rubber cleaner is installed on the stable working surface near the head roller to remove adherent materials on the reversible conveyor belt.
Type alloy rubber cleaner is installed on the non-working surface near the tail drum.
The alloy rubber cleaner is installed on the non-working surface near the tail roller to remove adhered materials on the reversible conveyor belt.
Function of alloy rubber cleaner
The residual material on the conveyor belt will also increase the friction on the roller, sometimes causing the surface rubber of the conveyor belt and the rubber layer of the roller to tear. If the cleaning device is good, the service life of rollers, conveyor belts, etc. can be extended. It can be seen that the sweeper plays an important role in the belt conveyor that cannot be ignored. During operation, if you try to manually remove the attachments on the tail drum, serious personal injury or death may occur. Therefore, in order to ensure that the belt conveyor is running properly, the attachments on the conveyor belt must be cleaned. At present, most domestic conveyor belt cleaners are alloy rubber cleaners, which use rubber blocks as elastomers to press the alloy cleaning scrapers on the surface of the belt. Although the cleaner has a simple structure, the cleaner function is good because it uses a hard The high-quality alloy scraper has long service life and good cleaning effect, and is widely welcomed by users.
Introduction to the Type Alloy Rubber Cleaner
The Type Alloy Rubber Cleaner is suitable for cleaning materials adhered to the working surface of the return belt and is a two-pass cleaner. Utilizing the elastic properties of the rubber body itself, the contact pressure between the cleaner scraper and the conveyor belt can be automatically adjusted to ensure that the stress on the scraper and the running belt is within a certain appropriate range, so that the cleaned material is both clean and Does not damage the tape.
The alloy rubber cleaner has the following characteristics
) It adopts a high wear-resistant special carbide scraper, and its good comprehensive mechanical properties extend the service life of the product
) Design structure Compact, reasonably formulated, the product is lightweight, beautiful, and easy to operate
) The spare parts of the product are interchangeable and adjustable, making it easier to install, debug, replace and repair.
The cleaner produced by our factory mainly consists of the following parts
, cleaning plate, rubber elastic block, intermediate bracket, cross beam, and adjustment device
Characteristics of alloy cleaner
The main material is Carbide. The solid rubber elastic pad is firmly stuck between the two metal plates. One end is connected to the cleaning plate through the middle bracket, and the other end is connected to the cross beam. By adjusting the bolt, the cleaning plate and the conveyor belt are closely attached, and the rubber elastic pad acts to absorb vibration. And the function of compensating wear and tear, ultimately achieving the ideal cleaning effect.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation
WhatsApp
