Dealing with Changsha Lift Platform Vibration Control Oil Pipe and Cylinder Operation Boarding Bridge

the lifting platform mechanical jam.
The rotating part of the lowering platform is not sufficiently lubricated, causing jamming and shaking, and should be lubricated in time.
The load-bearing area is large.
The load-bearing surface of the lifting platform is large, and the center of gravity of the Changsha elevator cargo will definitely shift. In addition, lifting platforms with large platforms generally need to be equipped with more than one cylinder. Due to the center of gravity of the platform, the cylinders will be unevenly stressed. , the input and return speed of the hydraulic oil will inevitably cause irregularities in the Changsha cargo elevator, etc., so the platform may shake or the table top may tilt.
Axle usage operating procedures.
Use a manual pump to adjust the height of the boarding bridge so that the height of the boarding bridge exceeds the floor of the truck compartment, and then back the car to a certain position.
Hook the chain on the boarding bridge securely to the truck.
Install the brake pads.
Open the manual valve of the boarding bridge, and press the lip plate of the boarding bridge to the bottom of the carriage (please open the manual valve before use, and do not use it with the valve closed, otherwise the equipment will be damaged).
Hydraulic lift oil pipe control, the longer the hydraulic oil pipe, the longer the lifting time. Therefore, when installing the Hunan lift, the length of the oil pipe should be reduced as much as possible within the design allowable range. On the basis of adjusting the power unit The size of the oil pipeline can also be adjusted, and corresponding adjustments can be made on the premise of ensuring that the equipment reaches normal needs and is safe.
Hydraulic lift cylinder control and cylinder size, while meeting the design requirements, reduce the cylinder size as much as possible. The smaller the cylinder size, the faster the lifting speed.
Salonyu Lifting Machinery Co., Ltd. is a professional manufacturer in Hunan Province that manufactures lifting freight elevators, lifting platforms, elevators, electric lifting freight elevators, disabled lifts, villa elevators, boarding bridges, etc. It has strong testing capabilities, advanced production technology, and is best-selling Nationwide, old customers are welcome to call and negotiate