Ancient building metal tile mold

Metal tile molds for ancient buildings
Factors to consider and specific operating methods for roof construction And it lasts forever. Lead-plated steel plates are made of aluminum, lead, and silicon, combining the corrosion resistance of aluminum with the effects of lead (the non-metallic lead is used to protect damaged parts of the steel plate on its own). Below, the manufacturer of colored stone metal tiles will take you to understand its application advantages.
) Will not crack, shrink or curl, does not burn, and can prevent the fire from spreading in the event of fire
) is light in weight and can minimize the weight load on the building
) is easy to design and construct (The length of one metal tile is equivalent to seven clay tiles)
) It can be 100% recycled and reused and will not harm the natural environment)
) It can withstand severe cold, severe inflammation, earthquakes, heavy rain, hail, and fire and other disasters)
) Wind resistance up to (mile/hour) There are a variety of colors to choose from. It can also be used in old buildings
) It is light in weight and can be used in high-rise buildings safely and easily. Base material % It is recyclable and has low requirements on building structure. It has complete accessories and can be adapted to various roofs.
The specially processed steel metal tile mold will not rust due to the oxidation of the air. The solid quality and elegant color. Royal Pioneer’s refined metal tiles are the best among tiles, which can double the style of the building. .
Under normal circumstances, the roof construction of colored stone metal tile production equipment will adopt three methods: cutting tiles, trimming colored stone metal tiles, and gathering vermiculite metal tiles. But generally speaking, arc-shaped tile roofs are used as bottom tiles, and semi-circular tiles are used as top tiles. That is to say, log purlins with a diameter of more than 100 mm and a regular spacing are placed horizontally on the load-bearing brick wall. The purlins are placed on top, and reed mats and linoleum waterproofing layers are laid on them. The water strips are spaced on top of them. The water strips are placed on the water strips at the same spacing as the tile strips. Finally, This kind of house is constructed by directly hanging the colored stone tiles on the hanging tile strips.
The construction operation of colorful steel tiles can start from the side ridge and middle ridge to the middle. If the scope of construction is large, it is recommended to divide the middle ridge into several ridges. For tile eaves, the dripping of the eaves and the tiles should be connected. The dripping out of the eaves should be .cm. allow. The hook head protrudes from the eaves close to the dripping water, and the height of the hook head is based on the eaves line. For dripping crickets, it is best to place a glazed core tile under the hook head to cover the gray tiles in the hook head. When installing metal tiles and eaves tiles, the copper wires for hanging tiles should be tied firmly to the tiles piece by piece and one end to the steel mesh. The copper wire should be tied with no less than two buckles.
The colored stone tiles should be arranged according to the arranged tiles and ridge markings on the ridges, and adjust the depth of the bottom tiles to make them consistent with those of the side ridges. However, when laying the bottom ash, you should pay attention to the mix ratio of cement, white, gray and sand. The bottom tiles should be firmly tied with copper wire and steel mesh. The bottom tiles should be placed straight and straight from the eaves to the ridge. Remember that the bottom tiles must be exposed uniformly! After placing the bottom tiles, smooth the gray on both sides of the bottom tiles along the tile wings. You can choose to use bottom gray to make up for any deficiencies. The colored vermiculite tile mold is used to fill the gaps between the bottom tile ridges with bottom ash, and the seam ash covers the tile wings of the bottom tiles on both sides.
The above is the specific operation method of steel metal tile roof construction. There are many details and it may not be easy to grasp, but as long as you are careful, you can still do the glazed tile roof construction work well.