Colored stone metal tile mold

Colored stone metal tile mold
Installation and acceptance method of colored stone metal tile mold hanging tile strips
There are many things to pay attention to when installing colored stone metal tile mold hanging tile strips. Today, colored stone steel tiles The experts will introduce it to you in detail first, hoping to help you in practice.
(1) Installation of tile hanging strips
Arrange the wiring according to the arranged wooden keels, and fix the wide and tall wooden squares on the cement base along the lines (water strips). The spacing is required to be no larger than The depth of the base layer shall not be less than . After the water strips are installed, nail the hanging tile strips on the water strips. They should be continuous one by one in the horizontal direction. The colorful steel tiles are only separated on both sides of the gutter and the roof control line
, colored stone metal In order to ensure that the tile hanging strips are on a flat surface in the tile production equipment, when installing the steel metal tile hanging strips, wooden wedges of different sizes can be added under the tile hanging strips to adjust the surface of the tile hanging strips to be smooth
, color Stone tiles are placed at the roof ridge, gable edge, and herringbone outer edge. In order to meet the installation requirements of ridge tiles and metal edge trimming, the height of the wooden keel is increased
and the lightning protection vertical rod can be installed at the same time when installing the colored stone tile hanging tile strips. carry out and cooperate with each other.
(2) Acceptance of hanging tile strips
Material acceptance Colored stone metal tiles must be wood that is not easily deformed after drying and anti-corrosion treatment or metal materials of corresponding specifications.
. Dimension acceptance. The cross-sectional dimensions of colorful steel tile hanging strips are, and the error is.
. Arrangement spacing acceptance. Except that the spacing between the tile hanging strips at the eaves and on both sides of the roof ridge is less than 1, the standard spacing between the tile hanging strips is.
. Flatness inspection: Colored vermiculite tile molds pull wires on each roof tile hanging strip, and detect the flatness error and allowable error.
. Stability acceptance check whether the steel metal tile hanging strips are loose and whether they are firmly connected to the base layer.