Steel metal tile equipment

Steel metal tile equipment
Process flow of steel metal tile equipment
Construction methods and price determinants of colored stone metal tiles on slope roofs
Roof construction of colored vermiculite tile production line Process flow measurement, laying out iron parts, burying sub-frames, installing laying out metal tiles, installing plate seams, processing and surface cleaning.
. Prepare vermiculite metal tiles before construction. Prepare the required materials and installation tools, such as keels, bolts, metal tiles, sealants, electric welders, electric hammers, pistol drills and hand tools.
The measurement and setting-out steel metal tile equipment is based on the floor axis of the upper opening of the sloped roof and the floor axis of the lower opening of the sloped roof, and the horizontal line of the upper opening and the lower opening of the sloped roof are measured. The lower openings are adjacent to each other. The intersection point of the horizontal lines is the lower opening and the upper opening of the water dividing line. The intersection point of two adjacent horizontal lines is the upper opening of the water dividing line. From this, the position of the water dividing line can be determined, and then the position of the horizontal and vertical keels can be determined by step spring lines according to the requirements of the drawing.
The transverse keels for the embedding of iron parts and the installation of sub-frames are arranged in parallel with a spacing, and are fixed to the concrete slope with expansion bolts at one spacing. The vertical and horizontal keels are connected by on-site welding. The longitudinal keels are made of flat iron and processed into the shape of metal tiles with the same width. The spacing is , and the welding is required to be firm. During the installation process of iron parts and sub-frame, attention must be paid to the accurate model and position of the iron parts, welding the sub-frame firmly according to the drawing requirements, and then painting all parts with anti-rust paint.
. For metal tile installation, place the colored stone and steel tile equipment into the correct seats, and install them sequentially from the bottom starting point upwards. The joint size and fixed distance between tiles must be accurate to prevent accumulated errors during the continuous installation process. During installation, the bottom surface sealant should be treated at the joints of the horizontal and vertical keels. The metal tiles are fixed with rivets at a spacing of 0.05 Å, and the joints must be straight and consistent.
The board seams are sealed with silicone glue. First, remove the protective layer on the board surface, clean the dust and oil stains at the seams of the board, apply a layer of sealant after drying, and when the rubber surface is first dry, use a putty knife to scrape the surface into the required shape. And make its surface flat and smooth.
Colored stone metal tile production equipment has been recognized by most builders. It is currently used in many construction projects, and corresponding problems have followed. Among them, the most concerned one is the price issue. So colored stone metal tiles What factors determine the price?
For colorful steel tile products, quality is an important determinant. The quality of the product is mainly determined by the raw materials. The price of good raw materials will be more expensive than ordinary products, and of course the service life will be longer.
On the other hand, metal tiles have different tile types and colors. Different tile types and colors have different production processes, which has already increased the cost, and the product prices will be slightly different when sold. For example, double-layer tiles are slightly more expensive than single-layer tiles, blue and red are slightly more expensive than other colors, etc.
The price of steel metal tiles is lower than that of other traditional tiles, and they are highly practical. In addition, the molds of colored vermiculite tiles are very malleable and the decorative effect is no worse than traditional tiles. These are the reasons why colored stone steel tiles are so popular. The prospects for domestic development will definitely be better in the future.