The first choice for leak-proof technology transfer--Beijing Huaxia Keyuan Technology Development Center

Leak-proof King Technology
One-time worry-free?
1. Foreword
?

2. Project Overview
The successful launch of this product will completely replace traditional waterproof materials and the popular polyurethane waterproof coatings and waterproof coatings currently on the market. It can penetrate into the building with just one spray. Every time A kilogram of concentrated liquid can be diluted twice. After dilution, the cost per kilogram is less than one yuan. It can be constructed per square meter. When used, it can be sprayed directly on the surface of an object and it can quickly penetrate into its interior and generate an active reaction group inside it. It forms a network of high molecular polymers and rapidly expands the conjunctiva inside the building to form a rigid protective layer that is both breathable and hydrophobic. When water drops fall on the surface of the building, it is like falling on a lotus leaf, leaving no trace. Moreover, the pores of the building are not sealed, and it is both waterproof and breathable. Water from the outside cannot penetrate, and the moisture inside can still be emitted to the outside. It is moisture-proof, mildew-proof, salt-proof, and does not grow moss. ?
3. Product Features
?
The product produced by this technology is non-toxic. It has no pungent odor, is non-volatile, does not burn, is miscible with water, and is harmless to the environment. pollution, fully in line with health and environmental protection requirements
.Excellent waterproof performance, excellent weather resistance and durability
.Strong impermeability, four times higher than ordinary cement
.Excellent wear resistance , the service life can be increased by more than times
. It has a passivating effect and has no rust on steel bars
. It can increase the density, compressive strength, tensile strength, wear resistance, abrasion resistance, and no cracking of the product. It does not expand, deform, or weather, and has color-preserving properties on building surfaces. The waterproof and leak-proof effect can be achieved within hours after construction.
4. Scope of use
. Widely used in waterproofing and moisture-proofing of roofs, interior and exterior walls, floors, bathrooms, kitchens, basements and warehouses, as well as rust-proof and anti-penetration of reinforced concrete structures
. Used for Underground civil air defense projects such as culverts, bridges, dams, tunnels, large hydropower stations, and water diversion projects to reduce water erosion. Prevent weathering
. Used in various pools such as swimming pools, purification pools, sewage pools, water towers, etc. The impregnation of body brick facings, asbestos, inorganic fabrics, insulation materials, etc., makes them have significant waterproof and moisture-proof effects
. It has been used for waterproofing, color protection, pollution prevention, and aging prevention of water-soluble architectural coatings. Widely used in exterior wall decoration
. Used as additives for latex paint, water glass and glue, which can make them have obvious water-increasing properties and maintain stable bonding strength
. Used in oil drilling. , can adjust the mud viscosity and density, which can effectively prevent drilling collapse and improve drilling efficiency
. It is used to start pumps and inject oil production layers in the later stages of oil wells to prevent the crustal skeleton of the oil production layer from collapsing. Allows oil far away from the oil well to be mined more smoothly
. Used for other special purposes to reduce water absorption and resist permeability and waterproofing.
5. How to use
. General surface construction
. This product should be mixed with water times (according to the requirements of the other party)
Mix evenly and then spray, brush and roll on the surface of the object. Yes, the dosage depends on the project requirements. Generally, the construction cost per kilogram is about square meters.
Construction of waterproof and anti-seepage mortar
Cleaning the base layer
Remove debris, oil stains, suspended sediment, etc. from the base layer to make it moist, clean, solid and rough. Use plain gray and cement mortar to level the uneven areas in layers.
Selection of materials
Ordinary Portland cement is not less than . grade, such as grade cement, the sand is clean medium sand, the mud content is less than %, and the particle size is.
The proportion of waterproof and anti-seepage solution and its mortar
. Preparation of waterproof and anti-seepage solution
Waterproof and rust inhibitor water (volume ratio, just stir evenly)
.Waterproof and anti-seepage solution Ratio of seepage mortar
Cement sand waterproof and anti-seepage solution
.Construction ratio (see table below)
Layer
Ratio of waterproof and anti-seepage solution
Mortar ratio
Waterproof and rust inhibitor water (volume ratio)
Cement sand waterproof and anti-seepage solution
Bonding layer cement slurry


Bottom waterproof mortar


Surface cement mortar


Construction
Apply waterproof and anti-seepage layer
First apply a layer on the surface of the waterproofed base layer The thickness of the bonding layer cement slurry is about 100, and then the thick bottom layer of waterproof mortar is compacted when it is initially set, and it is pockmarked with a wooden trowel. The thickness of the surface layer of waterproof mortar is finally about 100, and it is compacted and rolled out when it is initially set. If decoration is needed, a wooden trowel must be used to prick the surface. (The number and thickness of the waterproofing layers can be adjusted according to the design requirements)
When curing in the open air
Conservation should be carried out after the mortar is finally set. The method is the same as that of ordinary mortar, and the curing time is only a few days.
6. Use restrictions
. It is not suitable to be used on substrates with a large amount of water-soluble salts in the structure, and avoid contact with high concentrations of salts
. It is not suitable to be used in places with high acid environments (due to high acidity The environment is not conducive for carbon dioxide to participate in the reaction).
.The optimal construction temperature of this product is ℃℃
7. Profit analysis and product selling price
?
Square meters of factory building, workers ~ people.
The product cost is less than yuan per kilogram, and the market price is yuan/kg.
Concentrated Keluwang costs RMB 100 per kilogram and is shipped per kilogram. You are welcome to send a text message or call us to request free samples (the freight will be borne by you).
8. Technical service methods and fees
?
manufacturers that provide formulas, process flows, personnel training and materials for delivery units. .Technology transfer training fee of 10,000 yuan.
． Handle green mark certification and test reports from the National Chemical Building Materials Testing Center and the National Environmental Testing Center (at your own expense).
9. Precautions
This product is an alkaline aqueous solution. Avoid contact with skin, eyes and mouth. Once it splashes on the skin, wash it immediately with water if it splashes into the eyes. Immediately wash it with water for a few minutes and send it to the hospital for examination in time (do not wipe it with liquid medicine).
.During construction hours (lower temperature requires longer time, subject to complete drying), rain, flushing or other water sources should be avoided.
.After this product is diluted with water, it is best to use it up on the same day. Do not throw away the remaining solution.
.When this product is not in use, it should be sealed and stored in a cool, dry place.
Technical consultation phone number