Natural latex additive technology, two-component filter glue technology, water-based peritoneal glue technology

Water-based cold-adhesive peritoneal adhesive technology (solid content %% can be adjusted)
Following the new technology of low-cost and high-quality anti-theft door foam glue, another masterpiece has been successfully launched
1. Product application scope
?
The adhesive expert group of Jinghua Xia Keyuan Technology Development Center has made major breakthroughs on the basis of the original water-based cold-adhesive peritoneal adhesive technology after many technical researches in recent years, completely changing the production process of traditional peritoneal adhesive, which not only reduces Production costs, improve product quality, the products produced using this technology have been changed from the original one-ton reactor to produce tons of glue per day (hours) to the production of tons of glue per hour per day, and the solid content can be adjusted arbitrarily from % to %, greatly improving competitiveness , the product is mainly suitable for lamination of biaxially oriented polypropylene film, polyester film and color printing paper. It is suitable for the covers of hardcover books and periodicals, product promotional posters, instruction manuals and other high-end printed matter, as well as the lamination of various papers with gold and silver cards, boxes and bags with plastics.
?
2. Features
?
Non-ethylene vinyl acetate emulsion, good adhesion to film and ink. ?
The composite product has good brightness, realistic patterns, never changes color, and has no white fog clouds. ?
The composite product is loyal to the color and does not damage the ink color image. ?
It can be adapted to hot stamping, gold printing, silver printing, composite product rolling, and bumping without being affected. ?
Green and environmentally friendly products, non-toxic, non-polluting, non-flammable and non-explosive. ?
, no heating is required, the amount of glue used per square meter is about 100%, the process adaptability is good, the standby time is long, and the anti-scaling time is long. ?
It has good freeze-thaw stability and will not be affected when used in winter. ?
This product is suitable for both old-fashioned laminating machines and new laminating machines. ?
3. Production conditions
?
Room, one reactor (with heating device), workers, and general measuring instruments. The cost is about RMB ~ RMB per ton, and the market price is more than RMB RMB. ?
4. Basic parameters
Project indicators
Indicators
Value
.~
Solid content
~
Viscosity
～
Storage period
Months
Appearance
White emulsion
5. How to use
?
Apply the glue evenly and wait for The surface of the peritoneum is directly pressed together with the paper. The amount of glue applied depends on the specific conditions of the paper and membrane when rolled up and placed. The pressure is appropriate so that the glue is not squeezed out. ?
After rolling, place it left and right to start slitting. ?
After use, please clean the machine and tools with water. ?
6. Technical service method?
Provide a full set of technical formulas, process data, and on-site training until you learn it. ?
Technology transfer training fee of 10,000 yuan, free solvent-based laminating adhesive technology. ?
. Learn the two technologies of water-based laminating adhesive and dry laminating adhesive at the same time, and you can get a % discount.
7. Special Instructions
Recently, some customers from Anhui, Jiangsu, Shandong, and Hebei received water-based peritoneal glue and oil-based peritoneal glue in Sichuan. They all had technical problems that could not be solved and then came to our unit to learn again. After using water-based peritoneal glue (delivering oil-based peritoneal glue), the current production of % solid content covering powder is better than the original %. The delivery unit can go to the manufacturer for on-site inspection and study.
.manufacturers currently producing water-based peritoneal glue can be given a % discount.
Technical consultation phone number



Natural latex additive technology
1. Overview
Beijing Huaxia Keyuan Technology Development Center
The biggest feature of the natural latex additive technology developed by the adhesive expert group is that we use low-cost raw materials that are similar, compatible and compatible with natural latex to replace pure natural latex. %, on the premise that the product quality remains unchanged, the cost will be reduced by % based on the original natural latex. The product does not contain harmful substances such as benzene solvents and formaldehyde. It is mainly used for bonding fabrics, leather, paper, concrete, etc. It is also one of the must-select adhesives for sports shoe manufacturers. Market prospects.
2
Main features of the product
. Improve the strength of the adhesive film, promote the leveling of the adhesive liquid, improve the bonding strength between the adhesive film and the laminate, and be used to reduce the cost of natural rubber latex
/> .Non-toxic. Safe, no formaldehyde and other harmful gases released, easy to clean
. Moderate softness and hardness, good adjustability, temperature resistance. Good elasticity. High bonding strength
. The mixture can be directly added to the synthetic glue system. It can be directly blended into natural rubber latex
. The product dries and hardens quickly, and the film is soft and water-resistant
. The product has the characteristics of low cost, simple process, long storage time, and stable quality.
3. Scope of application
Shoe material composite, recycled leather production, latex foaming and latex products (except medical products) leather, leather, non-woven fabrics, sponges, cotton cloth, white slices (foaming, foaming) and paper.cloth The composite between cloth and cloth and between cloth and leather can also be used in high-end composite shoe fabrics, bags, packaging and other fields.
4. Production Conditions
The main equipment for producing this product is a homemade mixer (approximately yuan), workers per person, and a factory building of approximately square meters. The product cost is about RMB per kilogram, and the market price is about RMB. The raw materials for the production of this product are readily available in various places, and there are no special requirements for the educational level of production personnel. On-site training until you learn it.
6
Transfer methods and fees
Provide a complete set of formulas, process flows, and on-site training personnel for delivery units. ?
Technology transfer and training fee of 10,000 yuan. ?
Provide the delivery party with green mark certification and National Chemical Building Materials Testing Center test reports (at your own expense).
, a manufacturer that provides raw materials and equipment for delivery units.
Technical consultation phone number


Two-component filter element glue technology
1. Product Overview
With the rapid development of automobiles, diesel locomotives, generators, engineering machinery and other fields, the application of adhesives has become increasingly widespread, and people are paying more and more attention to adhesives, bonding materials, bonding processes, etc. Simplifying processing technology, saving resources, reducing costs, being environmentally friendly and pollution-free, and continuous production have become new goals pursued by customers, so the selection of adhesives is particularly important. Beijing Huaxia Keyuan Technology Development Center
The adhesive expert group developed a special room temperature curing filter adhesive for internal combustion engines and automobiles. It has good adhesion to rubber, metal, plastic, paper, etc. Structural adhesive needed for air filters and air filters. The product is non-toxic, environmentally friendly, energy-saving, and solidifies at room temperature. It has good initial adhesion to paper and metal, and has strong adhesion, high tensile strength, temperature resistance, oil resistance, grease resistance, and grease resistance. , good leveling and fast curing speed, suitable for both automatic and mechanized glue spraying equipment and manual operation.
2. Usage
Normal temperature filter element glue is suitable for paper filter elements used in internal combustion engines such as automobiles and tractors, and for bonding paper and iron plates. It has strong adhesion to metal end caps, and the cured adhesive layer has good water resistance, oil resistance, temperature resistance and aging resistance.
3. Features
. Two-component room-temperature curing special adhesive for filter elements has good adhesion to metal, paper, etc., and is resistant to impact, peeling and vibration fatigue
. It has a wide range of process adaptability and can be adapted to the heating of the drying tunnel or oven. It is also suitable for bonding and curing both ends together to improve production efficiency
. It has a long storage period, does not deteriorate and does not agglomerate.
4. Technical parameters
Appearance: white viscous liquid, material brown liquid
Viscosity
Bonding strength Initial bonding strength/
Peeling strength/
High temperature ℃, low temperature ℃ engine oil immersion There was no shrinkage, cracking or degumming in the hour-long high oil temperature resistance test.
5. Instructions for use
The surface of the end cover should be clean, remove oil and dust, and dry thoroughly. There should be no oil, water or other foreign matter on the surface to avoid affecting the bonding strength.
Before batching, stir or invert the ingredients in the barrel, mix the ingredients according to the or ratio, and stir thoroughly.
Inject an appropriate amount of adhesive into the end cap and leave it for a while to allow the adhesive surface to be evenly coated on all parts of the end cap.
Insert the filter paper (or center tube) into the end cover, check the surfaces of the two glued parts to ensure that they are in complete contact, then apply a little pressure on the top and let it sit.
After about an hour of curing, turn it over and glue it with the other end cap. It can be packaged after it is completely dry for an hour and used in the next day.
6
Production conditions and profit analysis
?
Annual production tons, equipment investment: two (self-made) mixers, scales and various measuring instruments. Factory
, production workers ~ people. ??
The product cost is RMB/kg, and the market price is RMB~RMB/kg
. Existing chemical plants, adhesive plants, and paint plants can produce it without adding additional equipment.
7. Technical service methods and fees
?

Technology transfer training fee. Ten thousand yuan. ?
Provide green mark certification and test reports from the National Chemical Building Materials Testing Center and the National Environmental Testing Center for the delivery party (at your own expense).
, a manufacturer that provides raw materials and equipment for delivery units.
Technical consultation phone number