Year1
Two application areas
Preparation of large-area pre-protective coatings for new or repaired mechanical equipment surfaces.
Three performance indicators
Indicator
Color
Blue
Density
Weight ratio B
Volume ratio B
Operating time mixing, ℃
Complete curing time, ℃
Hardness after curing rB/
Compressive strength B/
Tensile strength B/< br/>
Shear strength B/
Working temperature ℃
~
This parameter is obtained from the temperature ℃ and relative humidity under laboratory conditions. Since the actual working conditions are more complicated, it is recommended that the user do a pre-test according to the actual working conditions.
Four usage methods
Surface treatment: Polish or sandblast to remove dust, oil, and rust on the surface of the adherend, and finally clean with detergent.
For glue mixing, mix the two components evenly according to the proportion, and the color will be consistent.
Glue application: Apply the adjusted coating glue evenly to the surface of the object to be protected and reach a certain thickness.
Cure to be completely cured at room temperature or at normal temperature + heated to ℃ and kept at room temperature for complete curing.
Five Precautions
When the temperature is lower than ℃, appropriate heating measures should be taken, otherwise the curing time should be extended.
The operating time will be shortened when the ambient temperature is high or the amount of glue mixed is large.
This product is stored airtightly in a cool, dry environment and has a shelf life of one year and is transported as non-dangerous goods.
This product is a non-dangerous product, but please keep it out of your mouth and eyes and avoid long-term direct contact with the body.
WhatsApp
