Double bond 5014 high temperature inorganic glue

1. Product Introduction
Two-component, inorganic aluminosilicate material, the cured product is brown. The socket has high strength, heat resistance up to ℃, oil resistance, acid and alkali resistance, corrosion resistance, toughness, can be cut and processed like metal materials, is not insulating and conducts heat, and has an expansion coefficient similar to copper and stainless steel.
2. Application fields
Suitable for thermal conductive coatings, high temperature resistant castings, dent filling and repair, and temperature resistant bonding of copper and stainless steel materials.
3. Product performance
Performance
Product indicators
Name
Color
Specific gravity
Hardness
Electrical properties
Operation Time (m)
Compression strength (M)
Shear strength (M)
Socketing strength
(Steel)

Brown

Tough, processable
Non-insulating, thermally conductive


/

Performance
Product indicators
Name
Working temperature resistance (℃)
Dielectric resistance
Linear expansion coefficient
Bending strength (M)

~
Oil resistance, resistance to Acid and alkali,
Not resistant to waste water
Similar to copper and stainless steel (./℃)

4. Curing process
. Weigh the two components according to the solid-liquid ratio (.~.:m) and mix evenly.
． Apply the mixed glue to the parts to be bonded for bonding.
． After gluing, place it at room temperature for ~ an hour.
． Then heat to ℃ and keep at constant temperature for 1 hour.
． Then heat to ℃ and keep at constant temperature for another hour.
． Finally, cool slowly.
5. How to use
． Design and process the bonding and sealing joint surface, and the joint design is best to use socket and groove joints.
． Roughen the surface to be adhered and remove rust and dirt.
． Preparation of glue: Weigh the solid and liquid components in proportion, mix and mix thoroughly to form a flowable paste, and use it up after each glue preparation.
． Gluing and curing: Apply or pour the mixed glue to the parts to be bonded and sealed, and pressurize to solidify.