Year1
Two-component, the cured product is black, resistant to high temperatures and ℃, good insulation at room temperature, water-resistant, oil-resistant, but not acid-alkali resistant, high socket strength, and has a linear expansion coefficient similar to steel.
Two application fields
Suitable for bonding metal material bushings, cemented carbide turning cutters, milling cutters and gear cutters, repairing defects in high-temperature industrial and mining castings, rectifier devices, high-voltage electromagnetic tubes, potting and petroleum Bonding of instrument evaporation rods, etc.
Three product properties
Color
Heat-resistant temperature
℃
Hardness< br/>
Specific gravity
Operating time
Tensile strength
Shear strength
Socketing strength
Steel steel
< br/>
black
hard
< br/>
/
Performance indicators
Electrical properties
Volume resistivity
Dielectric resistance
Linear expansion coefficient
Peel strength
Good insulation performance at room temperature
℃,
Oil and water resistant,
Not acid and alkali resistant
Similar to steel,
Slight shrinkage
Four curing procedures
Weigh the two components according to the solid-liquid ratio and mix them evenly.
Apply the mixed glue to the parts to be bonded for bonding.
After gluing, place it at room temperature for an hour.
Then slowly increase the temperature to ℃ and keep it at constant temperature for 1 hour.
Then heat to ℃ and keep at constant temperature for another hour.
Finally, cool slowly.
Five usage methods
Design and process the bonding and sealing joint surface, and the joint design is best to use socket and groove connection.
Roughen the surface to be bonded and remove rust and dirt.
When preparing glue, weigh the two components of solid and liquid in proportion, mix and mix thoroughly to form a flowable paste, and use it up after each glue mixing.
Gluing and curing: Apply or pour the mixed glue to the parts to be bonded and sealed, and pressurize to solidify.
WhatsApp
