Product Details
1. Product Introduction
DB one-component ultra-high temperature inorganic adhesive is a one-liquid heat-hardening inorganic adhesive that contains no organic matter and is widely used
as a filler and coating agent. Its main components are refractory ceramics such as aluminosilicates and inorganic polymers, so it has excellent heat resistance. Breaking the limitations of traditional organic polymer adhesives, the heat-resistant bonding temperature can reach rdm. This product has many superior properties such as high temperature resistance, non-flammability, good solvent resistance, non-toxicity, and high bonding strength.
2. Product Features
After RDM heat treatment, it can withstand the highest temperature of ~ RDM and will not produce gas.
It bonds to metal, ceramics, glass, quartz, carbon, etc., and has high bonding strength even at high temperatures.
Has good resistance to hot and cold cycles.
It has good oil resistance, solvent resistance, chemical resistance and water resistance.
In addition to bonding purposes, it can also be used for filling, sealing, coating and other purposes.
3.
Applications
Bonding and potting of heating elements.
Heat-resistant bonding of metal, ceramics, glass, quartz, carbon and other items.
Suitable for requirements of solvent resistance, oil resistance, chemical resistance, and gas resistance such as trichlorethylene, kerosene, and ozone.
Heat-resistant, anti-corrosion, oxidation-resistant, and wear-resistant coatings for metals.
Can be used for heat-resistant molding materials.
, filling and bonding of explosion-resistant appliances and electrical regulating appliances.
The lamp mouth of the halogen lamp is fixed.
Combined with ignition plug.
Refractory materials, device fixatives, sealants, corrosion-resistant coatings.
4. How to use
To get the best effect, be sure to stir evenly before use.
Remove rust and dirt from the surface of the adherend, grind and roughen it, clean it with detergent and then dry it.
Apply DB evenly on the adherend. After combining the adherend, apply the above contact pressure and let it stand at room temperature for more than an hour.
Dehydration treatment: place it in an RDM oven and bake for an hour.
Heat and bake at rdm temperature for another hour.
Take it out and let it cool naturally at room temperature.
5. Filling and potting
Inject DB into the filling and let it sit at room temperature for more than an hour.
Dehydration treatment: place it in an RDM oven and bake for an hour.
Heat and bake at rdm temperature for another hour.
Take it out and let it cool naturally at room temperature.
6. Coating
Apply DB evenly on the object and let it sit at room temperature for more than an hour.
Dehydration treatment: place it in an RDM oven and bake for an hour.
Heat and bake at rdm temperature for another hour.
Take it out and let it cool naturally at room temperature.
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【One-component high temperature inorganic glue】are provided by member【Wuhan Double Bond Cam Sealing Material Co., Ltd.
】,By Titker Trade Network members 【Wuhan Double Bond Cam Sealing Material Co., Ltd.
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!