High temperature resistant inorganic glue with temperature resistance of 1400 degrees

1. Product Introduction
Two-component, inorganic aluminosilicate material, the cured product is gray-white. The socket has high strength, heat resistance up to ℃, oil resistance, acid and alkali resistance, and boiling water resistance. The linear expansion coefficient is similar to that of steel.
2. Application fields
Suitable for bonding glass fiber filter paper with aluminum foil, stainless steel plate, galvanized steel plate, etc. for high-temperature filters above ℃ and
High-temperature resistant bonding and sealing of metal parts High temperature anti-oxidation coating for potted metal materials.
3. Product performance
Performance
Product indicators
Name
Color
Hardness
Heat-resistant temperature (℃)
Socket Strength
(Steel)
Electrical properties
(Volume resistivity)
Dielectric resistance
Linear expansion coefficient

Gray
Hard and brittle
/
Good high temperature insulation
(℃, mm)
Resistant to oil, acid and alkali, not boiling water
Similar to steel
(./℃)

4. Curing procedure
． Weigh the two components according to the solid-liquid ratio (.~.:m) and mix evenly.
． Apply the mixed glue to the parts to be bonded for bonding.
． After gluing, leave it at room temperature for an hour
. Then heat to ℃ and keep at constant temperature for 1 hour.
． Then heat to ℃ and keep at constant temperature for another hour.
． Finally, cool slowly.
5. How to use
． Design and process the bonding and sealing joint surface, and the joint design is best to use socket and groove joints.
． Roughen the surface to be adhered and remove rust and dirt.
． Glue preparation: Weigh the solid and liquid components in proportion and mix thoroughly to form a flowable paste. After each glue adjustment
it should be used up within m.
． Gluing and curing: Apply or pour the mixed glue to the parts to be bonded and sealed, and pressurize to solidify.