Year1
B is a one-component addition type silicone sealant. It is a high-viscosity heat-curing organic silica gel that does not solidify at room temperature but can solidify quickly under heating conditions. It is easy to use, has excellent high-temperature aging resistance, good cold-heat resistance, high strength, and is compatible with the base. Materials, especially aluminum alloys and ceramics, have good adhesion.
Two application areas
Suitable for bonding various metal sheets, aluminum sheets, ceramics and organic glass, especially suitable for thermal conductive bonding of heating ceramics and heat-dissipating aluminum sheets.
Three performance parameters
Appearance
Light gray viscous body
Viscosity, ℃
~
Curing conditions, ℃
Specific gravity
~
After curing
Hardness r
~
Room temperature tensile strength
Room temperature shear strength
/> ,/
Elongation
Volume resistivity
Dielectric constant
Breakdown strength/
Dielectric loss factor
Temperature range ℃
~
Thermal conductivity[/]
Four Instructions for Use
Clean the surface Use an appropriate solvent such as alcohol to clean the adhered or coated surface.
The sizing product is stored in a low-temperature environment. It should be balanced at room temperature for ~ hours before use, and then evenly applied to the device to be bonded or screen printed, applying a contact pressure of about .
Curing is done by heating, and it can be cured at ℃ for a few minutes.
Five Precautions
The glue will not solidify if it comes into contact with the following substances
① Tin, organotin and rubber containing organotin.
②Sulfur sulfide and sulfur-containing rubber materials.
③Amine compounds and amine-containing materials.
This product should not be mixed with or come into contact with water, condensation silicone rubber with vulcanizing agent, epoxy resin polyurethane with curing agent, etc.
This product is a non-dangerous product, but please keep it out of your mouth or eyes.
Six-pack storage and transportation
Packaging specifications/barrel,/barrel,/barrel.
Store in a sealed seal in a cool, dry place, and store at low temperatures below ℃. The shelf life is one month. If the product passes the re-inspection after the expiry date, it can be used again.
This product is a non-dangerous product and is transported as a general chemical.
Please read carefully
The information contained in this article is what our company considers to be reliable. All data are obtained by our company's testing under laboratory standard conditions and are for reference only. The actual test data shall prevail when using. The product usage methods involved in this manual are only our company's suggestions. Since the customer's usage conditions, product storage, transportation and construction processes are not controlled by our company, it is necessary for customers to confirm the applicability of the product through experiments before use. Our company does not make any commitment to the data obtained from testing under other different conditions. Our company states that it does not assume any responsibility for the consequences of customers using the product for inappropriate purposes. If you want to know more safety information, please check the product safety data or ask the relevant sales personnel.
WhatsApp
