DB216 wear-resistant repair agent

1. Product introduction DB wear-resistant repair agent is a high-performance wear-resistant polymer ceramic material made of high-performance wear-resistant metals, ceramics, carbides, and quartz as aggregates, and compounded with modified and toughened resins. .
2. Application fields
Used for the repair and pre-protection of abrasive wear or erosion wear equipment such as pump bodies, induced draft fan impellers, etc., with abrasive grain diameter less than mm.
3. Performance indicators
Item
Indicators
Color
Gray
Density
Weight ratio
Volume ratio
Operating time (mixing, m)
~
Complete curing time
Hardness after curing (D)
Compressive strength (M)
Tensile strength (M)
Shear strength (M)
Working temperature
~
This parameter is obtained under laboratory conditions (temperature °C, relative humidity %). Due to the complexity of the actual working conditions, it is recommended Users conduct pre-tests based on actual working conditions.
4. How to use
.
Surface treatment: Grind or sandblast to remove dust, oil and rust on the surface of the adherend, and finally clean with detergent.
.
Glue mixing: Mix the two components evenly according to the proportion and the color will be consistent.
.
Glue application: Apply the adjusted coating glue evenly to the surface of the protected object to a certain thickness.
.
Curing: room temperature h for complete curing or room temperature h + heating to ℃ and insulation h for complete curing.
5. Precautions
.
When the temperature is lower than ℃, appropriate heating measures should be taken, otherwise the curing time should be extended.
.
The operating time will be shortened when the ambient temperature is high or the mixing volume is large.
.
This product is stored airtightly in a cool, dry environment and is transported as non-dangerous goods with a shelf life of one year.
.
This product is a non-dangerous product, but please keep it out of your mouth and eyes and avoid long-term direct contact with the body.