Supply double bond 5012 high temperature inorganic glue

1. Product Introduction
Two-component, inorganic aluminosilicate material, the cured product is gray-white. The socket has high strength, heat resistance up to ℃, good high temperature insulation, oil resistance, acid and alkali resistance, not boiling water resistance, and linear expansion coefficient similar to that of ceramics.
2. Application fields
Suitable for coating and potting of high temperature instruments, sensors, thermocouples and other temperature-resistant components, and high-temperature bonding of metal and ceramic materials.
Performance
Product indicators
Code
Color
Heat-resistant temperature (℃)
Hardness
Electrical properties
(Volume resistivity )
Socketing strength
(Steel)
Medium resistance
Linear expansion coefficient

Gray white
Hard, brittle
Good high temperature insulation performance
(℃,mm)
/
Oil, acid and alkali resistance
Similar to ceramics (./℃)
3. Product performance
/> 4. Curing procedure
． Weigh the two components according to the solid-liquid ratio (.~.:m) and mix evenly.
． Apply the mixed glue to the parts to be bonded for bonding.
． After gluing, place it at room temperature for ~ hours
. Then heat to ℃ and keep at constant temperature for 1 hour.
． Then heat to ℃ and keep at constant temperature for another hour.
． Finally cool slowly.
5. How to use
． Design and process the bonding and sealing joint surface, and the joint design is best to use socket and groove joints.
． Roughen the surface to be adhered and remove rust and dirt.
． Glue preparation: Weigh the solid and liquid components in proportion, mix and mix thoroughly to form a flowable paste, and use it up after each glue preparation.
． Gluing and curing: Apply or pour the mixed glue to the parts to be bonded and sealed, and pressurize to solidify.