Year1
B is a two-component dealcoholized silicone potting glue. Curing at room temperature, it has excellent resistance to high and low temperature changes, UV resistance and aging resistance, faster overall curing speed, and good bonding and sealing properties.
Two application fields
General type, used for potting, protection, bonding and sealing of general electrical modules.
Three product specifications
Component appearance
Black and white red fluid
Curing After
Component appearance
Colorless transparent liquid
Hardness Shore
~
Component viscosity, ℃
~
Linear shrinkage
Component viscosity, ℃
/>
~
Operating temperature range ℃
~
Operating performance
Mixing ratio weight ratio B
Volume resistivity
Viscosity after mixing, ℃
~
Dielectric constant
Mixed density/,℃
~
Dielectric strength/
Operating time, ℃
~
Tracking resistance index
Curing time, ℃
Tensile strength
Shear strength
Four usage methods
First, stir the components evenly, and pay attention to the appropriate speed. Too fast to avoid bringing in a lot of air.
Accurately weigh component B and component B according to the proportions, and mix them with B evenly.
Within the operable time range, pour the evenly mixed glue into the component and place it at room temperature to cure. It will take several hours for complete curing.
The ordinary type has an operable time of ~ minutes at ℃, and the initial curing time is ~ hours
The fast-curing type has an operable time of ~ minutes at ℃, and the initial curing time is ~ hours
Five
Notes
High temperatures in summer cure quickly, while winter temperatures are low and cure slowly. The amount of component B can be appropriately changed to adjust the gel time. Increasing the amount of component B can shorten the gel time, and vice versa. Users can adjust the dosage of component B within the range according to actual conditions.
If there is stratification of the components during long-term storage, the components can be stirred evenly in advance, and then mixed with component B for use. This will not affect the performance. Component B should not be exposed to air for a long time, otherwise it may Resulting in slow curing or even incomplete curing.
Six packs
Storage and transportation
/set,/set
Store airtight in a cool, dry environment below ℃, with a storage period of one year.
This product is a non-dangerous product and is transported as a general chemical.
WhatsApp
