Year1
- 型号：
- TNU3201
- 规格：
- 1KG/瓶
- 包装：
- 12瓶/箱
Packaging specifications: / piece
Product use: glass and crystal facade bonding
Product features: fast curing speed, good bonding It has high strength and good weather resistance. After curing, the glue layer has high transparency and is resistant to yellowing. It has extremely high adhesion to all kinds of glass and crystal.
Typical applications: Mainly used in display cabinets, glass handicrafts, glass furniture, bathroom and other industries.
Instructions for use: Before applying glue, first remove oil and dry the surface to be bonded. Determine the amount of glue to be applied as needed, close the bonding surface to make the glue layer uniform and discharge air bubbles under a certain power ultraviolet light curing lamp. It can be positioned after a few seconds of irradiation, and it can be completely cured by continuing to irradiate for a few minutes.
Storage period: months (sealed and under storage conditions).
Notes:
, should be stored at ℃ ~ ℃ ambient temperature, placed in a dry, ventilated, cool and dark place and out of the reach of children
This product contains acrylic acid and its esters It is a monomer-like product and is slightly irritating to the skin and eyes. Please keep the environment well ventilated when using it, and take safety protection measures to prevent the glue from coming into direct or prolonged contact with human skin. If it accidentally splashes into your eyes, please rinse immediately with plenty of water. If necessary, seek medical advice. After skin contact, rinse with soap and plenty of water.
Technical parameters:
Selection parameters
Before curing:
Appearance light yellow transparent liquid
Viscosity, ℃
Specific gravity.
H value.
Positioning time
After curing:
Hardness (Shao D)
Shrinkage (%)
Water absorption (%)
Temperature range (℃) ~
Tensile strength (M)
Peel strength
Dielectric constant (MHz).
Dielectric loss (MHz).
Dielectric strength (/mm)
Surface resistivity (m).
Volume resistivity (mm).
Remarks
Viscosity standard: measured at temperature ℃ using a container with diameter M and height M
, Positioning time is measured when plastic is bonded to plastic, measured under the condition of light intensity /m
, Tensile strength, shear strength is obtained by strength testing after bonding glass to glass or crystal.
Other test parameters are based on relevant national testing standards.
WhatsApp
