DB9035 silicone potting glue

1. Product introduction: Two-component, cured at room temperature or medium temperature, low viscosity and good fluidity. After curing, it has good adhesion, excellent heat resistance and chemical resistance, resistance to humidity, heat and atmospheric aging, and the cured product has good acid and alkali resistance. The cured product has good electrical and physical properties such as insulation, compressive strength, and high bonding strength.
Two application areas
Suitable for the perfusion sealing of lead-acid maintenance-free battery tank covers and the bonding sealing of other similar products.
Three usage methods
Keep the products to be bonded and sealed dry and clean
Take the amount according to the proportion B, and weigh it accurately. Please remember that the proportion is a weight ratio and not a volume ratio. Agent B After mixing, it is necessary to stir evenly to avoid incomplete curing
After stirring evenly, please fill the glue in time, and try to use up the mixed glue within the operating time
During the curing process, it will be cured at ℃ or room temperature. During curing, please keep the environment clean to prevent impurities from falling into the glue surface.
Four product properties
Product indicators
Code

Appearance

Agent viscosity ℃
< br/>
Hardness
r

Operating time ℃,,

Shear strength bonding B
Acid absorption rate
Volume resistivity


Full curing time


For transparent liquid
For transparent liquid





℃,
℃,

~



℃ , or ℃,~