Year1
- 型号：
- TNU6222
- 规格：
- 1KG/瓶
- 包装：
- 12瓶/箱
1. Product performance characteristics
. Fast fixing speed, reaching the highest bonding strength in ~ seconds.
. High adhesion and bonding strength, able to maintain long-term bonding.
. Has good flexibility and high elongation.
. Excellent aging resistance, no yellowing or whitening for a long time.
. Good moisture resistance and long-term waterproofing.
. Comply with RH and halogen-free environmental protection specifications.
2. Product parameters
Product model & bonding material & appearance & viscosity
., ℃ & curing energy
/& bonding strength
& hardness
> &Elongation
%&Temperature range
℃
General plastic/metal colorless and transparent&~&&D&&~+
&,/Stainless steel&colorless and transparent&~&&D&& ~+
&General plastic/metal&viscous and transparent&~&&D&&~+
&,/Aluminum&colorless and transparent&~&&D&&~+
&Iron, copper&colorless and transparent& ~&&D&&~+
3. Applicable objects of the product:
This series of products is mainly used for bonding between plastics and metals. After the glue is cured, it has good flexibility, excellent extensibility and shock resistance. After high and low temperature cycle testing, no degumming or cracking will occur. It is mainly used for fixing electronic scales, mobile phone parts, camera parts, bonding and fixing of electronic parts, and decoration of handicrafts. Typical adhered plastic materials include:,,B,,,,, etc. Typical adhered metal materials include aluminum, stainless steel, iron, copper, etc.
4. How to use
. Clean the surface of the material to be adhered. If there is any detergent remaining on the surface of the material after cleaning, please blow or wipe it dry and apply glue after it is completely dry.
. Apply glue evenly on the surface of the plastic to be adhered, place the adhered surface of the metal gently on the glue-coated plastic area to fit it, squeeze it hard to expel the air bubbles, and distribute the glue evenly, confirm The bonding parts are covered with glue, and the position is finally fixed.
. Use a cloth or paper towel to wipe away the excess glue that has spilled around the metal (do not use water, alcohol and other solvents to scrub). Do not let the glue come into contact with UV light before this step.
. Irradiate with a UV lamp with the main emission wavelength until the glue layer is fully cured (the irradiation time depends on the type, power, irradiation distance of the UV lamp and the UV transmittance of the plastic, etc.).
. After UV curing, if there is still glue overflow around the metal, you can use a blade to scrape it off.
5. Packaging and Storage
. Packaging specifications include grams/bottle, grams/bottle, and kilogram/bottle. Please contact us for special packaging specifications.
. Store in a cool and ventilated place away from light (ideal storage temperature ~ ℃) and sealed. The validity period is one year.
. Please see the instructions for other precautions.
WhatsApp
