Year1
- 型号：
- TN6210
- 规格：
- 250g/瓶
- 包装：
- 12瓶/箱
Product description:
This series of products is mainly used for bonding between glass and plastic. After curing, the glue has good flexibility, excellent extensibility and Shock resistance, no shrinkage or blooming during the curing process. After high and low temperature cycle testing, no degumming or cracking will occur. It is mainly used for glass substrate lamination, electronic parts bonding, and handicraft decoration. Typical adhered plastic materials include:,, B,,,, etc.
1. Performance characteristics
. The fixing speed is fast, and the highest bonding strength can be reached in ~ seconds.
. It has high adhesion and bonding strength and can maintain long-term bonding force.
. Has good flexibility and high elongation.
. Excellent aging resistance, no yellowing or whitening for a long time.
. Good moisture resistance and long-term waterproofing.
. Comply with R and halogen-free environmental protection specifications.
2. Selection parameters
Product model Appearance viscosity of bonding material
., ℃ curing energy
/ Bonding strength
Hardness
r Elongation
% Temperature resistance range
℃
General purpose glass/plastic colorless and transparent~&;-~+
Glass/colorless and transparent~&;-~+
General purpose Glass/plastic is sticky and transparent~&;-~+
Glass/, light yellow and transparent~&;-~+
Glass/, sticky and transparent~&;-~+
3. Instructions for use
. Clean the surface of the material to be adhered. If there is any detergent remaining on the surface of the material after cleaning, please blow it dry or wipe it dry, and then apply glue after it is completely dry.
. Apply glue evenly on one side of the plastic surface, gently place the other side of the plastic on the glue-coated area to fit it, squeeze hard to expel the air bubbles, and distribute the glue evenly, making sure that the bonding parts are all Covered with glue (the ideal thickness of the glue layer is .~.), the position is finally fixed.
. Use a cloth or paper towel to wipe away the excess glue that has spilled around the plastic (do not use water, alcohol and other solvents to scrub). Do not let the glue come into contact with UV light before this step.
. Irradiate with a UV lamp with a main emission wavelength until the glue layer is fully cured (the irradiation time depends on the type, power, irradiation distance of the UV lamp and the UV transmittance of the plastic, etc.).
. After UV curing, if there is still glue overflow around the plastic, you can use a blade to scrape it off.
4. Packaging and Storage
. Packaging specifications include grams/bottle, grams/bottle, and kilogram/bottle. Please contact us for special packaging specifications.
. Store in a dark, cool and ventilated place (ideal storage temperature ~ ℃) and sealed. The validity period is one year.
. Please see the instructions for other precautions.
WhatsApp
