Waterproof exterior wall insulation board equipment Fireproof perlite board equipment Waterproof insulation board equipment

Waterproof exterior wall insulation board equipment Fireproof perlite board equipment Waterproof insulation board equipment
Perlite insulation board equipment is a new type of exterior wall insulation board that integrates thermal insulation, heat insulation and waterproof functions. Also known as waterproof perlite insulation board, it is a heat-insulating and waterproof perlite insulation board made of expanded perlite bulk as aggregate, adding waterproofing agent and binder for preparation, screening, pressure molding, drying and other processes. equipment.

Application Scope of Perlite Insulation Board Equipment
Perlite Insulation Board is widely used in various construction fields and is a promising and emerging industry. The dominant use of perlite mines at home and abroad is to produce expanded perlite and its products. At present, the annual output of perlite exterior wall insulation boards in my country has exceeded 10,000, accounting for about % of the annual output of insulation materials in my country. It is the most widely used lightweight insulation material in China.
Perlite insulation boards are mainly used for walls and floors of residential, industrial, public buildings, swimming pools, cold storages, boilers and some insulation projects that have special requirements for waterproofing.
Perlite insulation board construction plan
Clean the wall
Remove the dust on the outer surface of the insulated exterior wall, remove the protrusions, level the recessed areas with cement mortar, and use a wooden trowel to roughen the surface. .
Prepare the perlite adhesive
Prepare the adhesive on site according to the weight ratio of the powder and paint according to the weight ratio of the perlite (depending on the temperature, the surface condition of the wall to be adhered, and the location of the adhesion, the mushroom weight ratio Fluctuate slightly), stir evenly and make it thick and set aside. The prepared adhesive should be used up within minutes. Adhesive that has begun to cure should not be reused. The amount of perlite adhesive varies slightly depending on the flatness of the wall.
Paste the hard perlite insulation board
Apply the evenly stirred perlite adhesive around the pasted areas of the perlite insulation board. That is, apply a wide and thick adhesive along the periphery, and then apply a little more in the center of the frame, with a diameter of 100 Å and a thickness of 100 Å. Apply a thin layer of adhesive on all four sides of the perlite insulation board and hang it from top to bottom. The threads (upper and lower rows) are pasted at staggered seams. When pasting the perlite insulation board, press lightly and knead quickly to make the surface smooth, squeeze out the adhesive at the seams and exceed the surface height of the hard-shell perlite. The thickness of the adhesive layer bonded between the perlite insulation board and the wall is appropriate, and the bonding area should be greater than %. The thickness of the adhesive layer between the perlite insulation boards is appropriate.[]