Weifang wood crusher, Rizhao wood crusher, Shandong sawdust crusher

Weifang wood crusher, Rizhao wood crusher, Shandong sawdust crusher/() body, italics, ( What are the common problems during the use of wood chip crusher?
/() body, italics, ( Wood processing equipment such as sawdust crushers are inseparable from blades. In particular, sawdust crushers have blades and hammer accessories such as screens, blades, pulleys, V-belts, bearing boxes, etc. If you need it, please contact our manufacturer as soon as possible. The logistics will be sent to you so as not to delay the normal operation of the equipment. Let me tell you about the common problems and treatment methods of sawdust crusher blades. In fact, the blades of machines such as sawdust crushers are movable knives and are fixed with screws, which is normal When using it, if you feel that the machine is not as productive as before, then the blade may be dull. You only need to replace or remove the blade, and then use a sharpener or sharpen the knife on sand and stone to cycle it back and forth until the blade is worn. Until the end, (the blade can be used for at least one month). There is also the screen. If the screen is not installed correctly, the screen can be easily damaged by the hammer. If you know the debugging of the blade and the correct installation of the screen, you will be able to use it. The service life of the machine is increased. The primary factor affecting the wood crusher is the screen problem of the wood crusher. Among them, the aperture and quality of the screen directly affect the screening efficiency of the wood crusher, and will also shorten the service life of the screen. Therefore, in order to ensure that the wood chip crusher has a high screening efficiency, the feeding must be continuous and uniform, and the feeding amount must be appropriate.