Oil mist purification scheme for workshop vacuum quenching equipment

Oil mist purification scheme for workshop vacuum quenching equipment. The vacuum pump produces a large amount of oil mist. The micron particles of oil mist will be inhaled into the human body and pose a health hazard. The oil mist is deposited in the work area, easily causing accidents such as work injuries, and is harmful to the physical and mental health of employees. At the same time, workplace fog Diffuse, reducing production efficiency, oil mist is deposited on the wall, causing potential fire hazards on the equipment, and may become the cause of machine tool internal and electrical system failures. If the mist is discharged outdoors, it will damage the environment. The most direct and effective way is to use an oil mist and oil smoke collector, which can pass harmful gases through a special purification system into fresh and clean air and discharge it indoors for recycling.
1. Advantages of oil mist and oil smoke collector equipment
) It is small in size and can remove various water-soluble and non-water-soluble oil mist.
) It has beautiful appearance and compact structure, and can be installed on the top or side of the production equipment.
) The air is filtered layer by layer in the multi-stage filter, so the dust removal effect is quite good.
) The discharge device adopts a positive voltage structure design, and the absorbed oil mist can be easily discharged.
) The oil dust sucked into the equipment flows along the bottom of the inner wall of the cylinder under the action of centrifugal force.
2. Oil mist and oil fume purifier
Working principle
The oil mist enters the filter chamber from the suction port and is adsorbed on the gas-liquid sintered mesh. After aggregation, combination and other effects, the oil mist enters the filter chamber under the influence of gravity. It slides down and sinks to the bottom under the action, passes through the oil drain pipe, and is discharged to the oil tank for collection. The remaining small part of the oil mist is completely absorbed by the special primary filter felt at the outlet of the filter chamber, and is also collected into the oil tank. The harmful air discharged from the air outlet is adsorbed by the carbon in the muffler and eliminated cleanly. The clean air is discharged to the workshop and can be recycled again.