Hangzhou welding fume purifier, good equipment is not afraid of competition

[Principle analysis of welding fume purifier
]
The internal high-pressure fan forms a negative pressure area at the suction arm cover. The welding fume enters the welding fume from the suction arm under the action of negative pressure. In the main body of the purifier equipment, the flame arrester at the air inlet blocks welding sparks, and the smoke gas enters the purification chamber of the main body of the welding smoke purifier equipment. The high-efficiency filter element filters the tiny smoke dust particles in the purification chamber of the welding smoke purifier equipment, and the clean gas passes through the filter cartridge. After filtration and purification, it enters the clean room of the welding fume purifier equipment. The clean air is further adsorbed and purified by the activated carbon filter and then discharged through the air outlet. The exhaust gas can meet the indoor gas emission standards required by the country.
[Welding Fume Purifier
Equipment Features
]
Filter element: It adopts a film-coated anti-static filter cartridge, which has low dust adhesion, easy dust cleaning, and has good ventilation efficiency , increase the filtration area
Suction arm: Use a universal hovering suction arm to ensure that smoke and dust can smoothly enter the dust collection hood under various working conditions, improve purification efficiency and ensure purification effect
3Mobility: It adopts universal wheels and is equipped with a locking function, which can facilitate the movement of the equipment and ensure point-to-point purification of welding fumes
Operability: This equipment is simple to operate, and there is a control system panel for the equipment in the workshop. Intelligent design has been adopted inside, and the operator only needs to control the main power switch and fan switch
Convenience: The welding fume purifier is a vertical stand-alone purifier that occupies a small space and is easy to move and can be fixedly used anywhere. , convenient for workers to operate
Dust cleaning method: automatic dust cleaning, flexible and convenient, without damaging the filter element
Purification host: This product is produced with a seamless mold to ensure the sealing of the host and good noise control.
Accessories maintenance: There are no wearing parts in the welding smoke purifier. Pantech uses imported filter elements that are longer than ordinary domestic filter elements (the service life of ordinary filter elements is - one year, and Pantech imported filter elements are 3-years)
[Welding smoke purification Device
Performance Index
]
Model





Dust removal air volume





Voltage
Single Arm
Single Arm
Filter Area





Filtration efficiency
Both
Both
Noise




< br/> Dimensions
**
Suction arm configuration
Single-arm type is the root suction arm
Double-arm type is the root suction arm

[Safety Instructions for Welding Fume Purifier
]
The equipment uses 3-volt three-phase alternating current. For safety reasons, please take measures to prevent electric shock
. After using the equipment, turn it off Power switch, please cut off the power of the device immediately
3. In order to prevent the motor from overloading, try to ensure that the continuous use time of the device does not exceed hours
. If you have any questions, please call our hourly customer service number.