TF-630 high-quality desktop enameled wire paint stripper, high-efficiency filter glue machine

Model high-performance enameled wire paint stripping machine
adopts the latest design of a high-speed paint stripping blade made of extra hard material, which can completely remove any hard insulating paint, enamel paint, etc. on the wire surface without damaging the copper wire itself. It is especially suitable for situations where the paint needs to be removed to the bottom of the coil. It is easy to operate and has excellent results. The model enameled wire paint stripper is equipped with a paint removal length termination device, which can accurately control the paint removal length of the enameled wire without serious pollution and hazards. , the paint stripping work is fast and safe. Specifications
Applicable wire diameter (.~.)
Machine size
Operating voltage/ .
Machine weight.
Installation and use
According to the cutter head table According to the specifications of the cutter head, select the appropriate cutter head and install it on the chuck at the front end of the machine. Insert an enameled wire in the middle of the cutter head. Use a fixed wrench to adjust the chuck so that the cutter head gently clamps the enameled wire, and then insert the enameled wire. Exit, hold the coil part with your hand and then easily push the enameled wire into the high-speed rotating cutter head until it reaches the preset paint stripping length, and then carefully withdraw the enameled wire. The paint stripping work will be completed. If necessary, you can loosen the enameled wire at the same time. Tighten the chuck to adjust the diameter of the cutter head and control to achieve the ideal paint stripping effect, because when the machine is started and the cutter head rotates at high speed, the insulating paint or oxides of the enameled wire will be cut off, and the enameled wire and copper wire after stripping will The surface is bright and clean.
To set the required length of paint stripping, loosen the fixing screw of the chuck. After withdrawing the chuck, you will see the limit ejector pin of the length of paint stripping. Use the fixing screw to adjust the limit ejector pin, which can be set and controlled. The paint stripping length of enameled wire.
A safety protective cover is included to ensure safe operation.