TF-730 desktop enameled wire large paint grinding machine, car reversing radar glue filling machine

Model high-performance enameled wire large paint grinding machine
, unique to the latest designed full-contact high-speed grinding wheel, which can automatically adjust the curvature of the wire body, and can completely remove any hard insulating paint, enamel paint, etc. on the wire surface without ever Damage to the copper wire itself. Without serious pollution and hazards, the paint stripping work is fast and safe. It is suitable for the wire diameter range (.), suitable for round wires and square wires, and can handle multiple strands of enameled wire at the same time. It is easy to operate and has excellent results. Specifications< br/> Applicable wire diameter (.~.)
Machine size
Operating voltage/ .
Machine weight
Installation and use
According to the grinding wheel specifications in the table, the installation is appropriate Put the grinding wheel on the machine, place an enameled wire in the middle of the two grinding wheels, adjust the two grinding wheels until the enameled wire is lightly clamped, hold the coil part with your hand and then turn on the switch to test the paint removal effect. You can adjust the The pressure on the contact surfaces between the grinding wheels is controlled to achieve the ideal paint removal effect.
When working, put the enameled wire into the top between the two grinding wheels, and then easily pull the enameled wire out from between the grinding wheels. The paint removal work is completed, because when the machine is started, the fiber grinding wheel rotates at high speed to insulate the enameled wire. After the paint or oxide is worn off, the surface of the enameled wire and copper wire is bright and clean after the paint is removed. A single enameled wire has a better paint removal effect.
When the surface of the grinding wheel is uneven or concave and convex during operation, it will cause wire breakage and paint peeling off. At this time, the grinding wheel needs to be trimmed. You can use emery cloth to trim and smooth the tapered part of the grinding wheel until both sides are smooth. The grinding wheel can be in smooth contact, and the grinding wheel should be dressed regularly during work, which can increase the service life of the grinding wheel.
When it is necessary to replace the grinding wheel with a new one, just pull out the unusable grinding wheel from the shaft and insert the new grinding wheel to start working again.