Year1
- 规格：
- 15kg/25kg
- 保质期：
- 12个月
- 粘度：
- 500MPaS
1. Product Introduction
Model
Name
Use
Composition
Properties
Viscosity
Spray glue
`Wood, non-woven fabric. Cloth, sponge plastic, leather, etc.
Special joint copolymer
Transparent
2. How to use
Wipe the pasting surface clean to remove residual grease or release agent on the surface
br/> Spray glue liquid on the dry and oil-free bonding surface
Method: Glue on both sides and wait for the surface to be semi-dry (that is, when the glued surface is not sticky when you touch it with your hands, about minutes), then apply it The sprayed rubber surface is pressed tightly to make it in close contact. This method can achieve positioning immediately after pressing the bonding surface, but it is recommended to test the bonding strength after an hour.
Method: Spray glue liquid on one side of the material to be bonded. After gluing, bond the other adhesive surface to the gluing surface. It can be used after an hour. This method requires about a minute to wait for preliminary positioning after gluing, but it saves glue. It is recommended to test the bonding strength after an hour.
Maximum bonding strength is reached within days.
The drying speed is different at different temperatures. It can be baked at ℃ / that's it
If the glue injection is too thick, you can add an appropriate amount of diluting water. It is recommended to use a proportion of glue diluted water~
3. Precautions
/> ,
In order to shorten the drying time, the following methods can be used
If conditions permit, the bonded items can be baked in a high temperature oven for an hour to achieve a fully dry effect
, Store in a cool, dry and ventilated place.
, shelf life is half a year.
Please call Ms. Mo
Plastic
WhatsApp
