Characteristic innovation of material seal pump brings value nlx142

Tianze adheres to the principle of integrity, mutual benefit and common prosperity, adheres to the principle of doing everything for users, continues to innovate and reform, constantly introduces advanced domestic and foreign technologies, strives to improve itself, and adds new glory to the material sealing pump of pneumatic conveying equipment.
The material sealing pump is sealed by the material delivered by itself, and the material flows naturally. The entire system has no other valves except the air inlet valve and the material port butterfly valve, and the operation procedure is simple. The diffusion mixing chamber is composed of a pump body, a gasification device, and an upper ash hopper. The discharge part is composed of the ash discharge nipple of the diffuser (reducing tube, gradually expanding tube). The low-pressure air from the air source enters the diffusion chamber of the pump body through the regulating valve (or pressure reducing valve), butterfly check valve, movable air duct, and nozzle. When the powdery or granular material falls from the hopper, it enters the nozzle and diffuser. When there is a high-speed airflow area between the devices, it will be blown away. Coupled with the gasification effect of the bottom gasification device, the material is gasified into a suspended state. After that, it is sent into the reducer tube of the diffuser by high-speed airflow, flows through the throat diffuser tube, enters the conveying pipeline, and is sent to the required unloading point, which completes the feeding process. The pneumatic conveying equipment material seal pump is a dilute-phase continuous micro-positive pressure powder material conveying equipment. The entire conveying process is closed, no dust, low noise, and the indicators meet environmental protection requirements.