Manufacturer supplies photo frames and other mini cameras

Camera Photo Frame Instruction Manual

Thank you for purchasing this product. This manual can guide you to use this product correctly. This product is a high-end product launched in response to market demand and has industry-leading digital camera and recording capabilities. It has camera motion detection and mobile storage functions, exquisite appearance, beautiful and practical, and is a good home security product

One functional parameter
One button switch key and camera button
Function Parameters
●Video recording: resolution*/*, frames/second, file format
●Photography: resolution, video encoding, file format
●Mobile storage: B interface, supports external Insert B, the card can be used as a disk
●Image ratio::
●Battery type: high-capacity polymer lithium battery
●Charging voltage:
●Supported systems:
●Interface type: B interface

Two operating instructions
◆How to turn on the computer?
In the power-off state, press the button for a few seconds until both the green and red lights light up and then release the button. The product will start up and enter the card detection state. The green light will flash once quickly and then go out. The red light will stay on, indicating that the card is stuck. The detection is successful and enters standby mode
◆How to take pictures?
In standby mode, short press the power button and the red light will flash once quickly to indicate that a photo has been taken and saved, and the machine continues to be in photo taking mode.
◆How to record?
In standby mode, short press the camera button and the red light will flash three times to indicate entering camera mode
◆How to stop recording?
During the recording process, long press the camera button, the product will stop recording and save the video file. At this time, the red light will stay on and enter standby mode
◆How to enter the motion detection mode?
In standby mode, press and hold the camera button and the red light will go out. The green light will flash three times quickly and then go out. At this time, it will enter the motion detection mode
◆How to exit the motion detection mode?
In the motion detection mode, short press the camera button to exit the motion detection, the red light will stay on, and enter the standby state

◆Status indication:
In the recording state , short press the power button, the red light will start flashing to indicate that the recording is in progress. Short press the power button again, the red light will go out, and the recording is still in progress
In the motion detection state, short press the power button, the green light will It will flash (the green light flashes slowly when recording, and the green light flashes quickly when detecting) to indicate that motion detection is in progress. Short press the power button again, the green light goes out, and motion detection is still in progress

◆ No card: If the red light and green light flash simultaneously for several times and then shut down, it means there is no card or the card cannot be recognized. At this time, you need to re-insert the card or replace the card.

◆Insufficient remaining memory space: The red light and green light flash simultaneously for several times and then shutting down indicates that the remaining memory space is insufficient

◆Low battery: During the recording process, if the battery power is about to be exhausted At the end, the red light and green light flash alternately for several seconds, and the product will forcefully stop recording and shut down after saving the video file. Please charge in time

◆How to charge?
Connect to the computer with an ordinary B cable to charge. When charging, the red light flashes slowly and the green light goes out. When fully charged, the red light and the green light stay on at the same time. The red light stays on, indicating that charging is basically completed. In any case, it takes at least two hours for the battery to be fully charged.
Three Precautions
Usage occasions: Please strictly abide by relevant national laws and regulations, and do not use this product for any illegal purposes, otherwise you will be responsible for the consequences.
About the battery: As the use time increases, the battery working time will be shortened. If it has not been used for a long time, please fully charge it before use.
File security: This product is not a professional storage device and does not guarantee the integrity and security of internally stored files. Please immediately back up your important files on a computer or other storage device.
Operating temperature.
Working humidity: %%. Please do not place the product in a humid working environment. The product is not waterproof.
Shooting illumination: Do not point the camera directly at the sun or other strong light sources to avoid damage to the optical components.
Cleaning requirements: Do not use it in an environment with excessive dust density to prevent the lens and other parts from being contaminated with dust and affecting the camera effect. The lens can be gently wiped with lens tissue or glasses cloth to keep it clean.
Other matters: This product is a precision electronic product. Do not subject it to strong shock or vibration. Do not use it under strong magnetic fields and strong electric fields.
Shenzhen Haomin Security Technology Co., Ltd.
Contact person: Tang Mei
Position: Sales engineer
: Email: @
Contact number:
Company address: Shenzhen Nanshan District br/>