Epson sixth generation nozzle

The round nozzle is the most core component of an inkjet printer. More than 90% of the quality of the machine's drawings is determined by the nozzle. However, the nozzle is the most expensive and most easily damaged component of the inkjet printer. , because of these particularities, the manufacturer has conducted various rigorous tests before the nozzle leaves the factory, and there will not be any quality problems. Therefore, everyone must do the following before purchasing the nozzle
. Youyuan ) 1. Please carefully check whether the machine has a print head problem
. Youyuan) 2. After the machine's print head broke before, especially if it leaked ink, some of them will burn the motherboard. If the motherboard is burned, replace the print head directly. Otherwise, the nozzle may be burned out, so before replacing the new nozzle, be sure to troubleshoot the motherboard, such as checking whether the fuse and counter tube on the motherboard are burned out and the fuse on the motherboard can only be replaced with the original one with the same current value. For insurance and tubes, you can only replace the original one with the same model. Replacing a fuse with a high current value or a different type of tube may burn out the nozzle and motherboard. Note (some motherboards cannot be repaired manually and must be replaced to solve the problem)
. Youyuan) Third, pay attention to the daily maintenance of the nozzle (you can use the nozzle moisturizing fluid to maintain the nozzle so as not to clog the nozzle). Expensive things like nozzles must be used with care.