Year1
- 有效喷射时间：
- ≥30
- 有效喷射距离m：≥6：
- ≥6
- 喷射滞后时间S：
- ≤5
1. Structure and composition of a fire extinguisher
A fire extinguisher is mainly composed of a cylinder, a head assembly, a nozzle assembly, a frame assembly and other parts. The fire extinguishing agent is sodium bicarbonate (type: Ammonium phosphate) dry powder fire extinguishing agent, the driving gas is nitrogen, and its working pressure at normal temperature is.
2. Main performance characteristics
This series of fire extinguishers have the characteristics of large fire extinguishing range, high efficiency and rapid fire extinguishing. The dry powder fire extinguishing agent contained has good electrical insulation, is not easy to be affected by moisture and deteriorates, and is easy to store.
The driving gas used is non-toxic and odorless, and will not harm the human body after injection.
The fire extinguisher bottle head valve is equipped with a pressure gauge, which can display its internal pressure and facilitate inspection and maintenance.
The fire extinguisher is equipped with an operating mechanism for easy operation and use.
3. Scope of use
It is suitable for extinguishing initial fires of flammable liquids and gases, and can also be used to extinguish fires of electrical equipment. The / type can also be used to extinguish fires of flammable solids. It is widely used in oil fields, oil depots, factories, shops, distribution rooms and other places. It is an essential fire-fighting equipment to prevent fires and protect people's lives and property.
The operating temperature range is ℃ ~ + ℃.
4. Maintenance
The storage environment temperature is ℃ ~ + ℃ and shall not be exposed to the scorching sun, close to fire sources, or subject to severe vibration.
Fire extinguishers should be placed firmly and the storage location should be ventilated and dry.
Regularly check whether the operating mechanism is flexible and convenient.
Regularly check whether the safety pin and lead seal are intact, whether the pressure value meets the requirements, and whether the parts are loose, deformed, rusted or damaged.
Five years after the fire extinguisher expires, every two years or before refilling, the bottle head valve, nozzle, etc. should be checked for damage, the cylinder should be checked for corrosion, and a hydraulic pressure test should be performed. If it fails, it should be tested. Scrap disposal.
Fire extinguishers should be repaired or refilled by a qualified professional fire maintenance department. Users are not allowed to disassemble or repair without authorization.
WhatsApp
