Hot selling Baotou exhaust gas treatment device FRP desulfurization dust collector FRP dust removal and desulfurization tower

Features
1. Durable The dust collector is made of fiberglass, which ensures that the dust collector body will not be corroded when the spray water level is high.
2. High desulfurization and dust removal efficiency The flue gas passes through the porcelain random packing, which increases the contact surface between the flue gas and the aqueous solution, accelerates the full dissolution and neutralization of the flue gas and the spray water, and improves the dust removal and desulfurization of the dust collector. Dust removal efficiency. The dust removal efficiency reaches above %, and the desulfurization efficiency reaches above 10%. This is rare in domestic wet dust removal. After using this dust collector, coal-fired boilers are fully qualified to be used in Class I areas.
3. The gas-water separation effect is good. The desulfurized and dust-removed exhaust gas passes through the high-speed cyclone separator, and the flue gas water mist is separated by the high-speed cyclone. The moisture content of the flue gas is extremely low. No water vapor can be seen during operation, and there will be no Causes corrosion to the induced draft fan and flue.
4. Water conservation Water is recycled in the system without sewage discharge, which not only eliminates the discharged sulfur dioxide but also treats the discharged sewage. It can also be widely used in water-scarce cities such as inland areas.