Drilling deep wells and stone wells in Lao Yuhang Drilling deep wells and stone wells in Lao Yuhang Drilling deep wells and drilling stone wells in Lao Yuhang

Song Dynasty welcomes consultation! Laoyuhang drills deep wells, West Lake drills Sandun deep wells, dewaters Pengbu road foundation pits, and light dewatering companies. Laoyuhang machine drills deep wells. Laoyuhang machine drilling factory uses deep wells. Laoyuhang drills large and small deep wells, drills deep wells, and drills deep water wells. The depth is generally in meters. The flow rate can reach tons per hour. The water from deep wells is crystal clear, free of silt and turbid, and is constant all year round. It is mainly used for corporate factories, mechanical cooling and heating air conditioning, bleaching, dyeing, washing, injection molding chemicals, breeding bathrooms, construction sites, water plants, villas, units, families, etc. The wells are opened to The underground water layer is warm in winter and cool in summer. It is inexhaustible and cannot be exhausted if it is continuously pumped away. The team ensures the flow of deep wells and ensures the quality of all materials such as water pumps and pipelines. It is on call at any time, implements three tasks, and strives for survival by reputation and quality. Well specifications are generally divided into the following categories. The flow rate is generally required to be within tons per hour, and the depth is within About meters, the diameter of the drill hole is about cm, the diameter of the lowered well wall pipe is ,, the power of the water pump is. Submersible pump, the well wall pipe specifications are customized high-quality pipes, with high quality, inspection reports, etc., the pipe has strong hardness. It can still withstand strong lateral pressure. The water intake pipe is equipped with a permeable filter to ensure that the deep water well is clean and free of sediment, impurities, etc. The pipe is a nylon pipe with a diameter of .3 inches. The deep water pump is hung in the deep well pipe, about 1 meter away from the wellhead. It depends on the rise of underground water level. All areas around the wall pipe should be sealed with coarser yellow sand, and the top of the wellhead can be sealed flat to restore the ground to its original appearance. For drilling deep wells of specified specifications, the construction unit must provide power supply (three-phase), water source, yellow sand (the coarsest slurry) and mud drainage channels. The drilling time is generally about a day to be basically completed. The flow rate is about tons, and the depth is generally about meters. The drilling rig drills pores straight, the diameter of the well wall pipe is Attached is a permeable filter and an anti-corrosion iron pipe with a diameter of 1.5 inches. The deep well pump is placed in the deep well for approximately 10 seconds, depending on the degree of rise in the underground water level. Fill the entire area around the water intake pipe with regular quartz sand, and seal all the quartz sand with mud. The top of the wellhead can be sealed flat to restore the land to its original appearance. . During the drilling of deep wells of this specification, the construction unit must provide power (three phases can be used), water sources and mud drainage channels. The drilling time is generally about days. The requirements for drilling freshwater wells with guaranteed water quality are generally more stringent. The water composition indicators basically meet the drinking standards. The flow rate is about tons per hour. The drilling depth in Jiangsu and Zhejiang generally requires water to be fetched below meters in Shanghai and lowered into the well. The wall pipe specifications are made of high-quality steel pipes and the diameter of the pipes is anti-corrosion iron pipes of 3.5 inches. The deep well pump is placed at about 100 meters in the deep well, depending on the degree of rise in the underground water level. Fill all areas around the permeable pipe with solid quartz sand. The upper layer of quartz sand must be filled with yellow mud with strong viscosity and no impurities. The top of the wellhead can be completely sealed to restore the ground to its original appearance. During the drilling of a deep well of this specification, the construction unit must provide power supply (three phases can be used continuously), water source, and yellow mud (transported to the side of the well). The time is usually about days. Drilling deep wells underground in rocks requires high drilling difficulty and a long construction period. The data on drilling deep wells are only provided for reference based on different stratigraphic structures. The details are to be completed through consultation between Party A and Party B. The scope of operation is all over the country.