Impact bed

规格：

HCC1000*1500

重量：

360kg

结构：

金属固架和缓冲条

Buffer bed
Buffer bed belt conveyor protection expert. When huge irregular undulating materials fall from a height, the huge impact force can cause various damages to the belt at the transfer point of the conveyor belt. Damage to rollers, tears and holes in belts are objectively common problems. If the belt does not have enough support at the transfer point to support this impact force, the impact force of the material between the two rollers will cause the belt running between the rollers to loosen and deviate, eventually causing the material to run out. Belt hem.
After the buffer strip is installed on the buffer bed, the buffer strip can provide a large support force to the belt throughout the entire width of the belt in the blanking area, thus greatly reducing the problem of belt damage caused by blanking. The top of each of our buffer strips is made of polymer polyethylene, which can minimize the friction between the buffer strip and the belt. At the same time, the buffer strips are composed of high-quality rubber strips to prevent impact loads. A steel feed frame installed at the bottom of the buffer strip also provides tremendous support. The installation and maintenance of the impact bed are very simple and can be completed by simply sliding the quick release lever.