KD fire hose hose connector (40 50 65 80 100)

型号：

KD

规格：

40 50 65 80 100

认证：

CCS

The fire hose joint ( ) is a commonly used interface in firefighting work. It is mainly used to connect the hoses when the hoses are extended. It is a quick interface connected by two pairs of chute inside the claws. , has the advantages of easy connection and quick release. It is used to connect water hoses with hoses, fire trucks, fire hydrants and water guns to transport water or foam mixture for fire extinguishing. It consists of a body, a sealing ring seat, a rubber sealing ring and other parts. The sealing ring seat has a groove for tying the hose. The hose interface is used for the connection between fire trucks, fire hydrants, water hydrants, and hoses. To deliver water or foam mixture for fire extinguishing. This product is a connecting accessory attached to various firefighting equipment, attached to water guns and fire hydrants. Fast, labor-saving, and reliable sealing performance. Made of all brass materials, it is sturdy and durable. The product structure is the most reliable supporting equipment for fire trucks at present.
//
Fire hose hose connector ( )
Instructions for use

, hose connection, fire hose must be padded when putting on the hose interface A layer of soft protection, and then tied with galvanized iron wire or hose hoop, fire copper hose interface.

The use of hose connectors
. When using a fire hose, the fire hose interface should connect the high-pressure hose close to the water pump. The water-filled hose should prevent twisting or sudden bending, and the hose interface should be prevented from being damaged by collision.

, water hose laying. When laying water hoses, avoid sharp objects and various oils. When laying water hoses vertically to high places, use hose hooks. When laying water hoses through traffic arteries, the water hose interfaces should be padded with water hose bridges. , when passing the railway, the water belt should pass under the track to prevent the water belt from being crushed by the wheels and interrupting the water supply.

, prevent freezing. In severe winter, when the water supply needs to be suspended on the fire ground, in order to prevent the water belt from freezing, the water pump needs to run at a slow speed to maintain a small water output.

Clean the hose and use the hose to knot the fire hose into the hose interface. Fire hose knot buckle, hose interface

Fire hose hose connector ( )
Use
When using the hose interface, connect two interfaces of the same caliber in order Rotate clockwise to connect, and rotate counterclockwise to detach. You should always check whether there is a gasket in the interface. It consists of a body, a sealing ring seat, a rubber sealing ring and a rotating dental floss. No need for connection. When twisting the thread and taking over the threaded interface, check whether the gasket inside the interface is complete and functional, and pay attention to the seal. Prevent interface collisions and affect normal connections. Do not mix with chemicals such as acids and bases, and keep away from heat sources to prevent the rubber body from aging.

Fire hose hose joint ( )
Specifications

Performance parameters
Model specifications
Nominal diameter
Sealing Performance
Mechanical strength
Dimensions
Applicable
Medium





Water, foam
Mixture