Three-way geogrid

Product Introduction
Triaxial triangular grating is the latest developed new geotechnical reinforcement material. Because of its triangular stable structure, it has more reasonable stability than one-way grating and two-way grating, and can withstand multiple loads at the same time. Directional load can more effectively disperse the load and is an ideal choice for geotechnical engineering reinforcement.
) The main advantages of angle grating
It has the most stable triangular structure and is not prone to structural deformation when subjected to force
It can withstand multi-directional loads at the same time and is not prone to node torsion failure
Because it has a rectangular cross-section, it is not easy to slip with the soil, and the reinforcement effect is better
Because the nodes are larger than the two-way grid, the node efficiency is higher, and the nodes are not easy to damage
And because of the multiple bars Sharing nodes means saving more materials and thus more energy.
) Axial triangular grating performance specification table (tentative)
Geometric requirements


) Rib length
) Node thickness
< br/>

) Rib cross-sectional shape
Rectangular
Rectangular
Rectangular
Rectangular
) Mesh shape
Triangular
Triangle
Triangle
Triangle
) Node transfer efficiency (%)
) Radial tensile modulus at low strain (@.% strain)

) Quality control tensile modulus (@%)




) Mesh stiffness (@.)

< br/>

Carbon black content
%
) ) Nodal efficiency is the load transfer capacity, expressed as a percentage of the maximum tensile strength
) br/>) Diameter The tensile modulus is measured by measuring the tensile modulus in each axis plane
) br/>) The quality control tensile modulus is measured according to the tensile measurement
) br/>) Mesh stiffness That is, on the horizontal plane, a certain torque is applied to the center node of the piece for measurement.
)
type geogrid is a new low-consumption, environmentally friendly geogrid independently developed by our company on the basis of single and bidirectional geogrids and learning from each other's strengths.
) The
type geogrid is a plate with natural arrangement and mesh holes extruded from the material through a rotating machine head. It is a terminal type grid formed in one step through directional stretching. We Fully considered the new method for calculating foundation settlement that has gained favor in recent years
The secant modulus method, repeated calculations with the Geotechnical Engineering Research Institute of the Nanjing Academy of Water Sciences, and proven by multiple destructive and load tests
)
.
After the type geogrid is loaded, the force will be dispersed and transferred in the direction of the ribs, and the load will be distributed evenly
)
The mechanical properties are more stable than single and bidirectional geogrids , the secant tensile modulus and durability are stronger, and its unique network structure is more suitable for the stress of earth and stone in different environments.
)
Node comparison
Welded grating steel plastic grating has absolute stability.