Heating film

Electrical materials such as wires, thermostats, temperature limiters, leakage protectors, air switches, junction boxes, sealants, etc. should comply with current relevant standards and regulations. The national compulsory product certification certificate and product qualification certificate should be used. Floor materials should use national Green environmentally certified products. Precautions for installing floor heating tiles
Before laying, the ground must be leveled. Avoid direct impact on the use effect due to uneven ground in the future.
) The floor heating insulation layer needs to be fully spread, and the auxiliary materials should not be too thick.
) The surrounding floor heating film should be at least away from the wall.
) When laying floor tiles, it is required to lay a special waterproof protection board on the floor heating film.
) When pasting the aluminum film, no bubbles are allowed. The temperature probe must be firmly fixed on the side of the floor heating sheet facing the ground and close to the center.
) Each terminal and line should be firmly connected, and the lines should be straight and horizontal. Lines are not allowed to cross in the direction and must be passed through pipes. Necessary sheathing pipes should be installed at corresponding locations. Lines are not allowed to be laid directly on the floor heating tiles, and should be placed in a reserved area centimeters away from the floor heating tiles.
) The connecting lines between the floor heating tiles need to be slotted and laid out in the reserved area, and necessary fixings must be made.
) When laying floor tiles, the thickness of the cement layer must not exceed 10%, otherwise the heating time will be affected.
When possible, the company's thin laying process must be used when laying floor tiles. Specifications of electric heating film
Product name
Electricity consumption
Width
Calorific value
Specifications

/

< br/>
/



/