Does anyone know where there is a professional production line for raised dot geogrid in Foshan, Guangdong?

规格：

4*100

Does anyone know where there is a professional production line for raised dot geogrids in Foshan, Guangdong?
[]
Guangzhou Jiexiu Company specializes in supplying various specifications of geogrids, plastic geogrids, and raised dot geogrids,
/>Two-way geogrid
, unidirectional geogrid,
Polyethylene geogrid
, geogrid, etc.
We welcome users and buyers from all over the country to call us to learn more Details of Guangdong Foshan Plastic Geogrid
Guangdong Foshan Plastic Geogrid
is a square or rectangular polymer mesh formed by stretching. Depending on the stretching direction during its manufacture, it can be single There are two types of stretch: one-way stretch and two-way stretch. It punches holes in extruded polymer sheets (the raw materials are mostly polypropylene or high-density polyethylene), and then performs directional stretching under heating conditions. The one-way stretched grating is only made by stretching the plate along the length direction, while the two-way stretched grating is made by continuing to stretch the one-way stretched grating in the direction perpendicular to its length.
During the manufacturing of plastic geogrid
the polymer molecules will rearrange and orient themselves during the heating and elongation process, which strengthens the bonding force between the molecular chains and achieves the purpose of improving its strength. Its elongation is only %~% of the original plate. If anti-aging materials such as carbon black are added to the geogrid, it can have better durability properties such as acid resistance, alkali resistance, corrosion resistance and aging resistance.
Steel-plastic geogrid
Steel-plastic geogrid
A geosynthetic product made of high-strength steel wire wrapped by high-density polyethylene into high-strength strips, formed at right angles according to the plane's longitude and latitude, and formed by ultrasonic welding Materials, different mesh diameters and number of steel wires can be used to change the tensile force of the ribs according to project needs.
What are the characteristics of steel-plastic grating? The tensile force of steel-plastic grating is borne by warp and weft woven high-strength steel wires, which produces extremely high tensile modulus under low strain capacity. The longitudinal and transverse ribs work together to Give full play to the interlocking effect of the grid on the soil.
The steel wires of the longitudinal and transverse ribs of the steel-plastic grating are woven into a mesh, and the outer wrapping layer is formed at one time. The steel wires and the outer wrapping layer can coordinately function, and the elongation at failure is very low (not greater than %). The main force-bearing unit of steel-plastic composite geogrid is steel wire, and the creep amount is extremely low.
Through the treatment of the plastic surface during the production process, rough patterns are pressed to enhance the roughness of the grid surface and improve the friction coefficient between the steel-plastic composite geogrid and the soil.
The width of steel-plastic grating
can reach up to 100%, achieving efficient and economical reinforcement effect.
, Steel-plastic grating
The high-density polyethylene used can ensure that it will not be corroded by acid, alkali and salt solutions, or oil at normal temperature, and will not be dissolved by water or invaded by microorganisms. At the same time, the polymer properties of polyethylene are sufficient to resist aging caused by ultraviolet radiation. After the grille is stressed, the vertical and horizontal ribs work together to prevent the nodes from being cracked or damaged. In actual projects, after the filler is compacted, it is not corroded by ultraviolet light and oxygen, so it can fully meet the requirements of permanent engineering construction.
It has high strength, small creep, adapts to various environmental soils, and can fully meet the use of tall retaining walls in high-grade highways.
It can effectively improve the interlocking and interlocking effect of the reinforced bearing surface, greatly enhance the bearing capacity of the foundation, effectively restrain the lateral displacement of the soil, and enhance the stability of the foundation.
Compared with traditional gratings, it has the characteristics of high strength, strong load-bearing capacity, corrosion resistance, anti-aging, large friction coefficient, uniform holes, convenient construction, and long service life.
It is more suitable for deep-sea operations and embankment reinforcement, and fundamentally solves the technical problems of low strength, poor corrosion resistance, and short service life caused by long-term erosion of seawater by gabions made of other materials.
It can effectively avoid construction damage caused by being crushed and damaged by machinery during the construction process.