Year1
- 功 率：
- 0.37KW～55KW
- 转 矩：
- 150N·m～20000N·m
- 单级：
- 7-87
Cycloidal pinwheel reducer
Series cycloid pinwheel reducer is a kind of machine that realizes deceleration by meshing cycloidal pintooth according to the planetary transmission principle with small tooth difference. The machine is divided into horizontal, vertical, biaxial and direct-coupled assembly methods. It is the preferred equipment for metallurgy, mining, construction, chemical industry, textile, light industry and other industries.
Product introduction
Cycloidal pinwheel reducer product model (horizontal installation)
Reducer
Reduction ratio rangebr/> Power.~
Moment~
Performance characteristics?
Cycloid reducer has a large reduction ratio and high efficiency. The one-stage transmission reduction ratio is ~, the two-stage transmission reduction ratio is ~, the multi-stage combination can reach tens of thousands, and the pin tooth meshing system is There is rolling friction and no relative sliding on the meshing surface, so the first-level deceleration efficiency reaches %.
The pinwheel reducer operates smoothly and has low noise. There are many pairs of teeth in contact at the same time during operation, with a large overlap, smooth operation, strong overload capacity, low vibration and noise, and low noise for various specifications of models.
Reliable in use and long in life. The main parts are made of high-carbon alloy steel that has been quenched and then finely ground. The meshing of the cycloidal teeth and the pin tooth sleeve is transmitted to the pin teeth to form a rolling friction pair with a small friction coefficient, making the There is no relative sliding in the meshing area and minimal wear, so it is durable.
Compact structure and small volume Compared with other reducers of the same power, the weight and volume are small/more. Due to the planetary transmission, the input shaft and the output shaft are on the same axis to obtain the smallest possible size.
. Smooth and reliable operation. Due to the multi-tooth meshing during the transmission process, the operation is smooth and reliable with low noise.
. Easy to disassemble and assemble, easy to maintain.
. It has strong overload capacity, impact resistance, small inertia moment, and is suitable for frequent starts and forward and reverse rotation.
Therefore, because of the irreplaceable advantages and characteristics of other types of reducers, cycloid reducers are widely used in various machinery industries and are very popular among users. Hexin
Description
Cycloidal pinwheel reducer is allowed to be used in continuous working conditions and allows operation in both forward and reverse directions at the same time.
The rated speed of the input shaft is rpm. When the input power is greater than kilowatt, it is recommended to use a rpm motor.
.The working position of the horizontally installed cycloidal pinwheel reducer is all horizontal. The maximum horizontal tilt angle during installation is generally less than. When exceeded, other measures should be taken to ensure adequate lubrication and prevent oil leakage.
Power
Single-stage speed ratio of cycloid reducer
Double-stage speed ratio of cycloid reducer
Instructions for use
, in use The specified lubricating oil should be added to the front reducer and transmission.
, the working environment temperature during use shall not be higher than ℃, and the temperature rise shall be lower than ℃.
, there are red painted screws and other places on the machine before leaving the factory, do not adjust them arbitrarily.
, the speed of the reducer must be turned on, otherwise, parts will be damaged.
, the machine should be used within the allowable torque range, and safety devices should be added when the torque exceeds the limit.
, various speed changers and reducers can operate continuously, forward and reverse.
Installation Instructions
When installing at the bottom, the centerline elevation should be calibrated, and when couplings are connected, the coaxiality should be calibrated.
When installing flange, attention should be paid to the coordination of the convex shoulder, concave shoulder and straight mouth.
, when installing the coupling, pulley and sprocket on the shaft outlet shaft. Do not hit hard, use the screw hole on the outer end of the output shaft to press in the coupling.
Factory address Liying Industrial Park, Rencheng District, Jining City, Shandong Province
Consultation phone number
Online
WhatsApp
