DFX-I Marine Firefighter Equipment (CCS Certificate)

型号：

DFX-I

认证：

EC CCS

The Marine Firefighter Equipment (Certificate) is manufactured in accordance with the requirements of the 2018 Amendment to the International Convention for the Safety of Life at Sea and the Rules for Classification and Construction of Sea-Going Steel Ships. It is equipped with the personal equipment and positive pressure air required by the rules. Breathing apparatus is one of the necessary equipment for ships. The product has been inspected by China Classification Society.

No.
Scale
Technical Parameters
Quantity
Note
br/> Protective Clothing
Foil composite resist ethylene material radiant heat source After irradiation, the temperature rise of its inner surface shall not exceed ℃
Cover
Including tops, pants, foot covers, gloves and books
br/> Pressure air respirator
Bottle working pressure< br/> Set
Certificate and certificate of conformity
br/> Fire rescue rope
Meter
Set
Certificate and certificate of conformity
br/> Explosion lamp< br/> Ming time is big
Lamp
Certificate and certificate of conformity
br/> Flat ax
Edge pressure resistance
Handle
Qualification certificate
br/> Full helmet
Puncture
Top
Certificate
br/> Anti-rubber boots
Slippery, anti-puncture, acid and alkali resistant
Double
Certificate
Marine firefighter equipment (certificate)
. Put on protective clothing and pants, fasten the suspenders, put on fire boots and fasten protective foot gloves, and use the fire ax Insert into the pocket on the trouser leg.
.Untie the fire-resistant lifeline and fasten the safety hook to the metal buckle of the fire belt.
.Check whether the explosion-proof lamp is intact. If the battery is not installed, install it first. For details on the inspection and use of explosion-proof lamps, please refer to the "Explosion-proof Lamp Instruction Manual"
. Put the bottom of the air respirator bottle upward on your shoulders, and adjust the shoulder straps and waist belt. Put on the protective clothing top, cover the respirator inside the back of the top to prevent strong heat radiation from the cylinder and hose, and pass the air supply valve through the pocket of the protective clothing top. For details on how to use protective clothing, please refer to the "Instructions for Use of Fire Insulation Clothing (Protective Clothing)".
.Open the cylinder valve switch and put on the mask. For details on the inspection and use of respirators, please refer to the relevant chapters in the "Respirator Instructions for Use".
.Wear a safety helmet, carry an explosion-proof light on your hand or on your shoulder, and enter the work area after checking that various spare parts are in normal use.
. It is also best to wear a mask and use a respirator after other wearing is completed, which can reduce the loss of compressed air in the cylinder.
.After use, firefighter equipment should be cleaned, sorted, inspected according to the requirements in the respective instructions, and then placed in the packaging box for later use.