Qingdao lifting equipment operating procedures

Operating procedures for lifting equipment
A variety of cranes should be equipped with signboards indicating mechanical performance, and hoist limiters, load controllers, interlock switches and other devices should be installed as needed. Rail-type cranes should be installed Travel limiters and clamping rails should be inspected and tested before use.
The two wire ropes must be arranged neatly on the drum, the tails are firmly clamped, and at least three turns are retained during work.
Article 3 Do not arbitrarily change the performance of the crane.
During the four operations, you must obey the signal from the commander. If the signal is unclear or may cause an accident, the operation should be suspended.
When lifting in five sections, no one is allowed to stay or walk under the lifting object.
The six lifting objects should be pulled on the ropes at a uniform and steady speed. Sudden braking and direction changes are prohibited. The lifting objects should be higher than obstacles. If it is more than 3 meters, it should be dropped at a low speed to prevent tipping.
When lifting seven objects, it is prohibited to stand on the object.
Article 8 Establish and complete crane maintenance, regular inspection, and safe operation systems, and educate relevant personnel to implement them conscientiously.
The Jiujo bridge crane should be driven by a full-time driver, and a dedicated person should be responsible for hooking and directing (an operator's certificate is required). Driving and commanding without a license is strictly prohibited.
The working location of the ten cranes must have sufficient lighting equipment and smooth lifting channels. It is prohibited to pass hanging objects over people's heads.
Article 11 The maximum lifting capacity is marked on the obvious part of the crane, and overload use is prohibited.
Shandong Tianli Heavy Industry Group Co., Ltd. mainly operates Qingdao cranes, Qingdao crane maintenance, and Qingdao lifting equipment.