Year1
- 型号：
- ZW-10
- 功率：
- 1.1KW
- 重量：
- 18KG
Scope of use
The attached concrete vibrator is an essential tool widely used in concrete vibration and compaction work in modern construction projects. It can be used for surface vibration of concrete foundation surface and various prefabricated concrete components. It can also be installed on various shaking tables and other vibration devices as a vibration source.
Technical parameters
Power
Voltage
Vibration frequency
Excitation force is
% copper wire
Structural features of attached flat plate vibrator< br/>. The attached concrete vibrator is a single-phase or three-phase asynchronous motor equipped with an eccentric block at both ends of the rotor shaft that matches the power of the motor.
.The whole machine has fully enclosed and high-strength performance, and is easy to disassemble, assemble and maintain. The power cord consists of a four-core rubber cable.
.The entire machine casing is made of aluminum alloy. Light weight and high efficiency. The two ends are fastened to each other with three long bolts. Relatively strong and reliable.
◎
Usage methods and precautions
The insulation condition of the motor should always be maintained in good condition. If it has been transported for a long distance or left idle for a long time, the phase-to-phase insulation and ground insulation of the coil should be measured, and the resistance should not be lower than
Megohm
(
Check at the same time
Whether the power supply complies with
)
.
When installing, the screw holes on the bottom plate should be in the correct position to avoid skewing the bolts. Prevent the body from being affected by abnormal pressure and affecting its service life. The anchor bolts and nuts must be tightened and the tightening force should be balanced.
It should not be operated for a long time on dry and hard soil. To avoid vibration skipping or even damage to the machine parts, safe power usage and operating procedures must be strictly followed during use. The motor should be equipped with a leakage switch, and the ground contact resistance should be checked regularly.
WhatsApp
