Centrifugal Air Compressor Gear | Atlas Centrifugal Air Compressor Service

Regular maintenance and maintenance of the main components of the centrifugal air compressor. In order to ensure the normal and reliable operation of the equipment and ensure the service life of the unit, it is necessary to formulate a detailed maintenance plan, perform scheduled operations, regular maintenance, and regular inspection and maintenance to ensure that the air compressor The unit is kept clean, oil-free and dirt-free. The replacement time of cooling lubricating oil in centrifugal air compressor accessories depends on the use environment, humidity, air compressor dust and whether there are acid and alkaline gases in the air. A newly purchased air compressor must be replaced with new oil during its first operating hours, and then once an hour according to the normal oil change cycle. Machines that operate less than 100 hours a year should be replaced once a year. The last point worth noting is that the centrifugal air compressor cooler needs to be inspected every three months. Clean the dust on the outer surface of the cooler, the fan cover, and the fan blades. Add lubricating oil to the motor bearings. Check that the hoses are There is no aging or cracking. Check the electrical components and clean the electric control box. When the centrifugal air compressor is working, the air is sucked in through the self-cleaning air filter. After passing through the automatic cleaning filter, the air enters the first stage of compression after being automatically adjusted by the inlet guide vane. The temperature of the gas after the first stage of compression is higher, and then Enter the intercooler for cooling (inside the water pipe, outside the air pipe, the water flow requirement of the intercooler is/) and then enter the secondary compression system. In order to prevent the gas in the system from pouring into the compression chamber (to avoid starting under pressure) There is a hanging full-open check valve installed in the exhaust pipe of the compressor. The gas discharged from the compressor pushes open the check valve and enters the exhaust muffler, then enters the first-level aftercooler, the second-level aftercooler, and then enters the exhaust Henan Haijie, which mainly provides after-sales services for centrifugal air compressors, has always believed that high-quality air compressor accessories are the basis for ensuring the normal operation of air compressor equipment. Due to the need for centrifugal air compressor maintenance and driven by profits, a variety of imported engineering air compressors and air compressor accessories have appeared on the market, but the quality is uneven.