Anhui anti-crack sticker real manufacturer

The real manufacturer of anti-cracking stickers in Anhui - Tai'an Luming
The anti-cracking stickers are made of reinforced fiber materials with good bending resistance, high tensile strength and anti-corrosion as the base material, covering the upper and lower parts with high-performance viscoelastic processed by special proportions. Material. This product has self-adhesive construction and can be directly applied to cracks.
Specifications and models
Thickness of the anti-crack sticker. . .
Tension force of the anti-crack sticker
Width of the anti-crack sticker
Copy
Note: Anti-crack sticker with tensile strength of The back is made of plastic woven cloth, commonly known as "black cloth", which has little strength and is not resistant to high temperatures. The back of the anti-cracking patch with a tensile strength is made of woven fabric, that is, "white cloth." This product has a high tensile strength and the fabric has a high soft elongation rate and is widely used in engineering.
Technical indicators (.)
Anhui anti-crack sticker real manufacturer-Taian Road Ming
Copy
Anti-crack sticker is also called (anti-crack sticker) and is used to prevent and treat pavement cracks. Cracks have always been a worldwide technical problem in road disease prevention and control, including reflective cracks caused by the base layer and surface cracks caused by the surface layer. The road anti-crack stickers developed by our company effectively solve the problem of road cracking and achieve the effects of road safety, durability, beauty and comfort. To avoid secondary damage to the road surface, it is suitable for maintenance construction of highways of different grades.
Anti-crack stickers are easy to construct, have strong adhesion, wide operating temperature range, long service life, and complete crack sealing. Anti-crack patch (also known as self-adhesive anti-crack patch) is composed of asphalt-based polymer, high-strength tensile tire base, and high-strength fabric that is resistant to high temperatures and is compatible with asphalt. This product has self-adhesive construction and can be directly applied to cracks. This structure is an organic and comprehensive application of several measures to prevent cracks on highways
Anti-crack sticker surface treatment
It is necessary to remove dust, water and other debris adhering to the surface to keep the road surface dry and clean.
, cracks (joints) with a width between &; must be cleaned and filled with sealant.
, cracks (joints) and sunken areas with a width between &; must be cleaned, filled with mortar, sealant or asphalt mixture and compacted to the existing height.
Cracks or pits that exceed the width must be cleaned first and then filled with mortar or hot asphalt mixture and compacted to the existing height.
. Cracks (joints) and sunken areas with different heights must be leveled.
. The protrusions on the bridge deck and road surface must be cleaned or leveled until they are smooth.
Environmental conditions
It should be used when the surface temperature is equal to or greater than ℃.
If the surface temperature is lower than -℃, it is recommended to use warm fire baking anti-crack stickers. The anti-crack stickers should be flat, wrinkle-free, and not warped.
If there is overlap during the laying process, the overlap length is. There cannot be more than two layers of overlap.
It is recommended that after laying the polymer anti-crack sticker, roll it with a rubber wheel roller at least three times.
After the paving is completed, vehicles can pass. However, the interval between laying the upper layer should not exceed hours.